Specialty Chemical Products & Performance Ingredients

text.skipToContent text.skipToNavigation

✓ Das Produkt wurde dem Angebot hinzugefügt

Inhaltsstoffe für die Körperpflege

Pharmazeutische Inhaltsstoffe

Spezialchemikalien

Wir haben 579 Elemente gefunden.

Filter

Nachhaltigkeit

Musteranfrage

Mustergröße:

Anwendung / Projektbeschreibung

Kontaktdaten des Antragstellers
Vollständiger Name
Unternehmen
Position
Telefonnummer
Geschäftliche E-Mail-Adresse
Lieferadresse

Absenden

Thank you. Your request has been sent.

BECKOCOAT PU 428/51XMPAC

BECKOCOAT PU 428/51XMPAC is a rapid curing. Radiant brilliance. Superior abrasion resistance. Outstanding impact resistance, excellent adhesion. Floor sealers, wood coating, concrete impregnation. Crosslinker for alkyd resins in two-component systems.The extreme abrasion resistance, impact resistance, and chemical resistance make Beckocoat PU 428 films cured with the action of air humidity an excellent sealer and impregnation medium for concrete, a binder for non-slip coatings, for concrete coatings resistant to fuel oil and abrasion, for instance in garages, or for floorings and coatings for walls and ceilings in laboratories, chemical factories, etc. The films cure to radiant brilliance and can also be recommended for wooden floors subject to heavy wear like in bowling alleys, roller skating rinks, dancing halls, gymnasiums and schools. Beckocoat PU 428 has also proved an ideal vehicle for coating sports articles like spears, bowling pins, golf balls, bats, hockey sticks, tennis rackets, etc. In exterior use, Beckocoat PU 428 will lose gloss and will yellow. Weather resistance and gloss retention can be enhanced through coemploying alkyd resins like VIALKYD AR 408.

Spezialchemikalien

Angebotsanfrage

SETATHANE D E 2656

SETATHANE D E 2656 is applied in combination with DesmodurÂ® VL as a binder for chemically resistant coatings. SETATHANE D E 2656 is suitable for the formulation of coatings and mortars with high chemical resistance for food and beverage industries. Coatings formulated with SETATHANE D E 2656 / Desmodur VL generally exhibit very good resistance to organic and inorganic acids, alkalis and solvents. Overcrosslinking of 500 % is usual. This optimizes chemical resistance and flow. To ensure blister-free curing, SETATHANE D E 2656 requires the addition of hydrated lime and/or cement as a CO2 scavenger.

Spezialchemikalien

Angebotsanfrage

SETATHANE D 1160

SETATHANE D 1160 is applied in combination with solvent-free, predominantly aromatic polyisocyanates, as a binder for flexible floor coatings. It is the most suitable co-reactant for SETATHANE D 1160 is Desmodur VH 20 N. Other polyisocyanates such as Desmodur VL are also suitable but the compatibility must be tested in each case. SETATHANE D 1160 can be used in the formulation of flexible floor coatings. Coatings based on SETATHANE D 1160 and Desmodur VH 20 N are characterized by their high flexibility and good mechanical strength.

Spezialchemikalien

Angebotsanfrage

SETATHANE D 1155

SETATHANE D 1155 is applied in combination with e.g. SETATHANE D 1145 and 1150 in the formulation of coatings SETATHANE D 1155 is not recommended as a sole binder. Because of its low viscosity, SETATHANE D 1155 is especially suitable for combination with SETATHANE D 1145 and 1150 in the formulation of solventfree, self-leveling polyurethane coatings of low viscosity. DesmodurÂ® VL or VL 50 are normally used as hardener.

Spezialchemikalien

Angebotsanfrage

Melden Sie sich jetzt an oder registrieren Sie sich, um vollen Zugriff auf Tausende von Produkten zu erhalten.

In Ihren Warenkorb gelegt

Produktverfügbarkeit nach Filialstandort

Stunden

Vorname*