Farb & Beschichtig

BECKOPOX EP 386W/52WA is an internally plasticized solid resin-Type 1-dispersion with improved shear stability, e. g. for water reducible fast drying anticorrosion primers and coatings for plastics. BECKOPOX EP 386W/52WA is an internally plasticized type 1solid epoxy resin as aqueous dispersion. Formulated together with adequate curing agents such as e. g. Beckopox EH 613w or VEH 2188w it is suited for corrosion protection primers with very good adhesion to most metallic substrates. It is also suitable for use in single coat and decorative systems for metallic substrates. For optimium corrosion protection it is recommended using 80 % of the stoichiometric curing agent not contain functional groups capable of reacting with epoxy groups.

BECKOCURE EH 2260W/41WA is an hydrophobic amine hardener especially for the formulation of waterborne metal coatings, free of volatile basic amines and solvents. In combination with epoxy dispersions fast drying Primers and Monocoats with excellent corrosion protection and very good non-sagging properties can be formulated. The product shows excellent application behaviour and a very robust performance even on poorly prepared surfaces. Beckocure EH 2260w is used together with solid epoxy resin dispersions or emulsified liquid resins. Best results are obtained using 50 - 75 % of the stoichiometric amount of hardener. The films cure rapidly at room temperature but can also be dried at elevated temperatures. Grinding of the pigments can be done in Beckocure EH 2260w or as well in shear stable epoxy dispersions (e. g.: Beckopox EP 2384w, Beckopox EP 386, Beckopox EP 387 or Beckopox VEP 2381w). The mill base temperature should not exceed 40 °C. The use of binder-free pigment pastes is recommended when the grinding temperature cannot be controlled. Dilution can be done with Beckocure EH 2260w or an epoxy dispersion.

SETALUX 1202 SS-70 is a high solids content with airless or airmix spray applications. In combination with aliphatic poly-isocyanates: fast drying, good hardness, good outdoor durability,good gloss and build, good solvent and chemical resistance and good mechanical properties. It is used as industrial topcoats with good solvent and chemical resistance.

BECKOCOAT VPU 4204/40LG contains flatting agent. Rapid curing. Good abrasion resistance. Excellent resistance to chemicals. For floor sealers, wood paints and concrete impregnation sealers. Owing to its high abrasion resistance, Beckocoat VPU 4204 is an ideal binder for wooden floor sealings and concrete impregnation, e. g. in bowling alleys, dancing halls, gymnasium and schools. Beckocoat VPU 4204 is used as sole binder. The degree of flatness or brilliance can be varied to desire by combining it with Beckocoat PU 428. For special outlets it is possible to mix Beckocoat VPU 4204 with suitable colouring pastes shortly before application (concrete paints).