MACRYNAL SM 510N/60LG LC is a high gloss, very good mechanical properties, excellent outdoor stability and chemical resistance. In combination with polyisocyanates for at room temperature drying or forced drying two-pack systems for the industrial lacquer sector. In combination with aliphaticpolyisocyanates Macrynal SM 510 is recommended for at room temperature drying or forced drying two-pack systems. The principal application is the industrial lacquer sector. Coatings based on Macrynal SM 510 provide very good solvent and chemical resistance as well as excellent outdoor stability.

MACRYNAL SM 507/53XBAC is a high quality two-pack clear lacquers for wood and furniture coatings, parquet sealings. For fast drying two-pack lacquers for industrial applications at ambient temperature as well as forced drying . Superior adhesion to Aluminium and plastic parts (ABS and PC). Macrynal SM 507 is suitable for the manufacture of high quality two-pack coatings for furnitur and parquet, even on a industrial scale. In combination with polyisocyanate hardeners e.g. Desmodur N or Desmodur L, clear and pigmented lacquers for furniture can be formulated, which exhibit high chemical resistance, light fastness and quick drying velocity. Remarkable is the good compatibility of Macrynal SM 507 with Desmodur HL. On dark stained wood high gloss coatings can be obtained. For industrial applications aliphatic polyisocyanates like Desmodur N should be preferably selected as hardeners. Such combinations yield in highly resistant lacquers, which exhibit excellent drying properties, high mechanical strength and high surface hardness after spray application. Due to its rapid drying and excellent compatibility Macrynal SM 507 is especially suitable for the formulation of metallic base and automotive refinshing clearcoats.

MACRYNAL SM 500/60X is a high gloss, good mechanical properties and good adhesion to metals and plastic substrates. In combination with polyisocyanates for air-drying as well as forced drying primers and topcoats in industrial applications. In combination with polyisocyanates Macrynal SM 500 is suggested for air-drying and forced drying two pack systems. The principal application area is industrial coatings, in particular primers and topcoats. Due to the good adhesion to metals primers meeting the German Federal Railway Specification TL 18300 (sheet 34, 588.34.12, sheet 49, sheet 87, section 1.2.1.) +can be formulated.

MACRYNAL SM 508/50BAC is a low polyisocyanate requirement. Fast drying. Resistant to yellowing, good surface hardness and solvent resistance after a short period. Broad spectrum of compatibility with physically drying binders. Used in combination with polyisocyanates for two-component polyurethane varnishes for high quality industrial applications. Formulations free from aromatic solvents are possible. Macrynal SM 508/50BAC lends itself to the formulation of superior two-component lacquers for furniture and industrial metal coating. By combination with aliphatic polyisocyanates, e.g. Desmodur N or Desmodur HL, clear and pigmented furniture varnishes are obtained, which are characterized by good resistance to chemicals, lightfastness, rapid drying, and high gloss even on wood types of dark staining. For industrial coatings, preferably aliphatic polyisocyanates such as Desmodur N should be selected as combination partners. Such combinations yield weather-resistant industrial topcoats, which dry quickly after spraying and show good mechanical properties and high hardness. Macrynal SM 508 is also suited for the formulation of chromate-free metal primers of good stability.