Vernici e rivestimenti

SYNTEVEN 451 is a highly reactive polyester styrene resin used as a binder for mastics. It cold-hardens at low temperatures, forming a transparent and durable polymer. It is recommended to use fillers like talc, dolomite/calcite, crystalline gypsum, and iron-free barite for improved sandability, adhesion, and compactness.

SETATHANE D 1156 is used as a reactive diluent in combination with e.g SETATHANE D 1145, SETATHANE D 1150 and SETATHANE D 1160 in the formulation of 2-pack PU formulations and coatings to modify physical and mechanical properties.Generally speaking, SETATHANE D 1156 has good compatibility with the solvents listed. However,the solutions formed have to be tested for their storage stability.SETATHANE D 1156 can be thinned with esters, ketones,ether esters and aromatic hydrocarbons.Prolonged storage of a solution with low binder content may result in turbidity and sedimentation. Only PUR grade solvents should be used (< 0.05 % water).The solvent should not contain reactive groups.Because of its low viscosity, SETATHANE D 1156 is especially suitable in combination with SETATHANE D 1145,D 1150 and D 1160 in the formulation of solvent-free,self-leveling polyurethane coatings of low viscosity.

SETATHANE D 1150 is applied in the formulation of tough-elastic coatings. It is used in combination with other polyols such as SETATHANE D 1145, 1155 and crosslinked with Desmodur® VL, SETATHANE D 1150 is suitable for use in the formulation of two-component coatings. These are mainly used on concrete and asphalt floors and steel surfaces. After crosslinking and curing of SETATHANE D 1150 with Desmodur VL, the resultant coatings are tough and flexible, hard-wearing and hemicalresistant. It can also be combinedwith Desmodur L to formulate highly resistant sealing compounds.

SETATHANE D 1145 is applied in the formulation of hard and tough coatings and synthetic resin mortars.It is used in combination with other polyols such as SETATHANE D 1150 and crosslinked with Desmodur VL, SETATHANE D 1145 is suitable for use in the formulation of two-component coatings. The main applications are in the construction industry. Curing yields hard to tough but flexible films which are resistant to abrasion and chemicals. In combination with other polyols such as SETATHANE D 1150 and crosslinked with Desmodur VL, SETATHANE D 1145 is suitable for use in the formulation of two-component coatings. The main applications are in the construction industry. Curing yields hard to tough but flexible films which are resistant to abrasion and chemicals.