Prodotti chimici speciali

S-06E is an electronic grade epoxy. It can be used as a casting resin, in LED encapsulation, insulating materials, 3D printing, carbon fibre cable cores and other composite materials, giving outstanding performance for UV resistance and anti-radiation properties. It is UV curable, thermal curable with anhydrides, high TG up to 195ºC, excellent yellowing resistance and good UV resistance, outstanding electrical insulation, low halogen and high purity and low viscosity.

S-21 is a distilled base epoxy resin for use in formulating UV-curable cycloaliphatic epoxide coatings systems. S-21 contributes to primary film properties. S-21 has both carboxylate and epoxy groups, with the potential for fast cure. S-21 is widely used in industry for the preparation of inks, resins, coatings, and encapsulation.

BECKOPOX® EM 2120W/45WA is an epoxy-amine-adduct dispersion in water, containing very small amounts of organic co-solvent. BECKOPOX® EM 2120W is suited to formulate water borne 1 pack anticorrosive primers and 1 pack single coats with good anticorrosive properties, especially on smooth steel. Due to the special character of BECKOPOX® EM 2120W, very fast drying coatings can be formulated. Pigments and extenders should be dispersed in a pigment paste since BECKOPOX® EM 2120W does not possess sufficient shear stability. Organic solvents in the formulation should be added to the pigment paste or should be diluted with water before adding to EM 2120.

BECKOPOX EP 386W/52WA is an internally plasticized solid resin-Type 1-dispersion with improved shear stability, e. g. for water reducible fast drying anticorrosion primers and coatings for plastics. BECKOPOX EP 386W/52WA is an internally plasticized type 1solid epoxy resin as aqueous dispersion. Formulated together with adequate curing agents such as e. g. Beckopox EH 613w or VEH 2188w it is suited for corrosion protection primers with very good adhesion to most metallic substrates. It is also suitable for use in single coat and decorative systems for metallic substrates. For optimium corrosion protection it is recommended using 80 % of the stoichiometric curing agent not contain functional groups capable of reacting with epoxy groups.