Specialty Chemicals

S-06E is an electronic grade epoxy. It can be used as a casting resin, in LED encapsulation, insulating materials, 3D printing, carbon fibre cable cores and other composite materials, giving outstanding performance for UV resistance and anti-radiation properties. It is UV curable, thermal curable with anhydrides, high TG up to 195ºC, excellent yellowing resistance and good UV resistance, outstanding electrical insulation, low halogen and high purity and low viscosity.

BECKOPOX® EM 2120W/45WA is an epoxy-amine-adduct dispersion in water, containing very small amounts of organic co-solvent. BECKOPOX® EM 2120W is suited to formulate water borne 1 pack anticorrosive primers and 1 pack single coats with good anticorrosive properties, especially on smooth steel. Due to the special character of BECKOPOX® EM 2120W, very fast drying coatings can be formulated. Pigments and extenders should be dispersed in a pigment paste since BECKOPOX® EM 2120W does not possess sufficient shear stability. Organic solvents in the formulation should be added to the pigment paste or should be diluted with water before adding to EM 2120.

EPOXY NPEK-114L is a C12-C14 aliphatic glycidyl ether diluted liquid resin, which has low viscosity to processing easily. It is excellent than conventionally diluted epoxy resins as better filler acceptance, reduced odor, lower vapor pressure and less potential for handing hazards. Cured NPEL-114L provides good levels of chemical resistance and physical properties, such as aliphatic polyamines and polyamides, usually their curing temperature are at room temperature.