Specialty Chemicals

VIALKYD AC 451N/70SNB is used as automotive finishes with high gloss and excellent weather resistance and paints for household appliances. It is used as stoving enamels VIALKYD AC 451n/70SNB is suitable for cross-linking with amino resins especially to formulate high quality stoving systems for automotive top-coats and one-coat systems for household and electrical appliances. Films based on VIALKYD AC 451n have good gloss, high body and excellent outdoor durability as well as resistance to petrol and UV radiation. Excellent impact resistance, flexibility, adhesion and surface hardness round out of VIALKYD AC 451n properties. VIALKYD AC 451n is generally used with reactive conventional melamine resins in ratios of 70 : 30 to 75 : 25 (on solids). Depending on the reactivity of the melamine resin curing takes place at temperatures of 120 - 140 °C for 30 min. When using high reactive dehydrated castor oil alkyd resin grades such as VIALKYD AR 340 in combination with melamine resin it is possible to reach curing conditions of 30 min 100 - 120 °C. In addition it is possible using an acid catalyst (e. g. 0.5 - 1 % p-toluene sulphonic acid, 10 % in xylene) to increase reaction speed to enable on-line repair in the automotive industry.

VIALKYD VAS 9904/70SNA is a pigmented pasts, finish enamels with high resistance to yellowing, air drying and oven drying. Thanks to the good weather resistant properties and to the high compatibility and solubility in many solvents, VIALKYD VAS 9904 is very good as binder for high concentration pigment pastes.

VIALKYD AY 402/50X is an extremely fast initial and through drying. Excellent recoatability at any time. Excellent adhesion to steel and aluminium. Superior protection against corrosion Excellent water resistance. Anticorrosive primers. Spraying fillers, knifing and spray putties. Air-drying and forced drying industrial and machinery paints. VIALKYD AY 402/50X is an air-drying acrylic modified phthalic resin with specific properties owing to additional modification with isocyantes. VIALKYD AY 402 is primarily used sole binder in the formulation of anticorrosive primers, and putties and for air drying and forced drying industrial enamels and machinery paints. Anticorrosive automobile primers Primers based on VIALKYD AY 402 show extremely rapid set and through drying, excellent recoatability at any time with VIALKYD AY 402 or other paints containing aggressive solvents. The compatibility with basic pigments affords formulation of zinc chromate primers and primer fillers with excellent perfomance, particularly in terms of superior corrosion resistance, mechanical properties and water resistance. It is also possible to formulate zinc chromate free primers on base of zinc phosphate.Spraying fillers and spraying putties VIALKYD AY 402, in spray putties and fillers, exhibits quick drying and thus quick sanding and excellent adhesion to steel and aluminium. VIALKYD AY 402 has excellent recoatability and gives very good surface without lifting. Industrial paints In the formulation of industrial and machinery paints, with adequate pigmentation VIALKYD AY 402 affords radiant gloss, extremely rapid drying, excellent adhesion to steel and non-ferrous metals. The paints can be forced-dried at 60 - 100 °C. With curing temperatures of from 60 °C upwards no driers are required.

Rapid initial and through drying, along with good brushability. High filmhardness and abrasion resistance. Very good resistance to chemicals and water. Single binder in wood, industrial and floor finishes. Combinations with other long oil alkyds for improved drying and resistance. VIALKYD TO 608 is an oil-modified polyurethane resin which doesn't contain free isocyanate and is characterized by rapid initial and through-drying and high resistance to water after appropriate drying. It is used as single binder in wood, floor and industrial finishes and in primers. In combination with long-oil alkyd resins its drying properties are considerably improved. Addition of up to 30 % of VIALKYD TO 608 to other long-oil alkyd resins does not impair their respective outdoor performance. Wood and industrial finishes Rapid drying and high resistance to chemicals and water are the most remarkable characteristics of VIALKYD TO 608. Finishes on the basis of VIALKYD TO 608 are readily brushable, display excellent flow properties and yield films of high hardness already after short drying. Combinations of VIALKYD TO 608 with other resins, e. g. VIALKYD AF 764 produce interesting results. Initial and through drying are considerably improved. The good weather resistance and brushability of VIALKYD AM 764 is not impaired in a 70 : 30 (solids content) blend of VIALKYD AM 764 and TO 608. VIALKYD TO 608 is also suitable for forced drying up to 70 °C. Floor finishes On account of its good drying properties and abrasion resistance VIALKYD TO 608 lends itself very well to the manufacture of floor finishes. Its high gloss films provide good surface protection for floors exposed to heavy wear