Specialty Chemicals

SETAL 1201 SM-50 is Good hardness, fast drying and abrasion resistant. It is used as decorative varnishes.

SETAL 142 XX-60 LC is very fast drying, good elasticity and yellowing resistance (also at elevated temperature), good adhesion on steel. It is used as fast drying industrial topcoats. Fast drying corrosion resistant primers. General purpose stoving enamels.

SETAL 199 SS-55 is a good drying properties, very good body, good colour, gloss retention and exterior durability. It is used as auto-repair enamels, Enamels for cars, trucks and buses, Enamels for tractors and agricultural equipment, Air-drying industrial enamels.

Rapid initial and through drying, along with good brushability. High filmhardness and abrasion resistance. Very good resistance to chemicals and water. Single binder in wood, industrial and floor finishes. Combinations with other long oil alkyds for improved drying and resistance. VIALKYD TO 608 is an oil-modified polyurethane resin which doesn't contain free isocyanate and is characterized by rapid initial and through-drying and high resistance to water after appropriate drying. It is used as single binder in wood, floor and industrial finishes and in primers. In combination with long-oil alkyd resins its drying properties are considerably improved. Addition of up to 30 % of VIALKYD TO 608 to other long-oil alkyd resins does not impair their respective outdoor performance. Wood and industrial finishes Rapid drying and high resistance to chemicals and water are the most remarkable characteristics of VIALKYD TO 608. Finishes on the basis of VIALKYD TO 608 are readily brushable, display excellent flow properties and yield films of high hardness already after short drying. Combinations of VIALKYD TO 608 with other resins, e. g. VIALKYD AF 764 produce interesting results. Initial and through drying are considerably improved. The good weather resistance and brushability of VIALKYD AM 764 is not impaired in a 70 : 30 (solids content) blend of VIALKYD AM 764 and TO 608. VIALKYD TO 608 is also suitable for forced drying up to 70 °C. Floor finishes On account of its good drying properties and abrasion resistance VIALKYD TO 608 lends itself very well to the manufacture of floor finishes. Its high gloss films provide good surface protection for floors exposed to heavy wear