Hóa chất đặc biệt

RESAMIN HF 480 has the properties of a plasticizer as well as that of a soft resin. It contains no organic solvents. It is light-fast and heat resistant and stable against hydrolysis. Resamin HF 480 is mainly used as a soft resin in nitrocellulose lacquers for the coating of wood and paper to improve flexibility, adhesion, gloss and outdoor durability. Resamin HF 480 can also be used in stoving systems based on alkyd/amino resins or in coatings based on thermoplastic resins to improve flexibility and adhesion. In combination with thermoplastic resins like Hostaflex (PVC) or Butvar (poly vinyl butyral), pigmentation and gloss development are improved as well.

MODAFLOW LAMBDA is a unique acryl-silicone polymer hybrid technology flow promoter combining individual efficiencies from high end acrylic as well as silicone leveling performance. It is highly compatible in all non-aqueous clear coat and topcoat formulations and outperforms surface characteristics such as: gloss, DOI, sharpness & brilliancy, anti orange-peel effect. It is efficient at low dosage levels and incorporates easily in many solvent borne resin types including high solids and ultra-high solids. Further it can be applied in solvent free and radiation curing systems.MODAFLOW LAMBDA demonstrates superior balance of compatibility and effectiveness compared to traditional silicone or acrylic flow and leveling additives in Automotive OEM, refinish as well as industrial coatings. Due to its high hydroxyl functionality, MODAFLOW LAMBDA may be co cross-linked in stoving or 2K systems and does not show a decrease in interlayer adhesion. In multiple layer systems the stoving temperature should not exceed 130 °C to ensure a good recoatability. The recommended dosage level is 0.05 % calculated on total formulated coatings as a starting point and optimum dosage range is between 0.05 % - 0.3 %. In some cases the dosage could be increased up to 0,5 %.

CERIDUST 8090 is a revolutionary bio-based additive for wood coatings

LICOMONT CAV 102 P powder is a calcium salt of long chain, saturated, linear carboxylic acids (montanic acids), providing excellent nucleating and lubricating effects in all kinds of injection moulded polyamides. In injection moulding applications of polyamides the reduction of the cycle time up to 25 % is possible.