Peintures et revêtements

SETALUX 17-1275 is a fast–dry thermoplastic acrylic resin solution supplied in Aromatic 100. This resin solution may be utilized in various clear or pigmented air-dry or force-dry general industrial finish coats. The dry speed, compatibility, durability and non-yellowing characteristics of SETALUX 17-1275 make it a very suitable choice for use in a broad range of coatings.

SETAL 12-1646 is a fast drying rosin and phenolic modified alkyd for use in the formulation of primers which have exceptionally good resistance to corrosion and lifting by subsequent topcoats. SETAL 12-1646 meets the resin requirement of Federal Paint Specification TT-P-664C for rust inhibiting, lacquer resistant primer.

DAOTAN TW 6450/30WA is recommended as the NMP / NEP- free alternative for DAOTAN (V)TW 1236. Like the latter, DAOTAN TW 6450 is a polycarbonate-based, high molecular weight Polyurethane dispersion. Dried at ambient temperature, DAOTAN TW 6450 provides clear, crack-free films without further addition of organic solvents or additives. These films exhibit excellent elasticity and mechanical properties and very good adhesion to different plastic substrates like e.g. ABS, PC, PA, PVC, PC/PBT. Accordingly DAOTAN TW 6450/30WA is particularly recommended for waterborne plastic primer and waterborne auto OEM Basecoats with outstanding requirements regarding stone chip resistance properties. A further use is as modifier resin to improve stone chip resistance properties of e.g. auto OEM primer surfacer formulations. DAOTAN TW 6450/30WA can be used as an adhesive for pharmaceutical and food packaging applications. It provides excellent peel strength and long-term humidity resistance. It is ready to use; no further formulation is needed.

Beckopox EH 2162W is a hardener designed for water-reducible coatings on mineral and metallic substrates. It is particularly suitable for concrete coatings, offering lower viscosity and a longer pot-life compared to standard hardeners like Beckopox EH 623w, especially at lower VOC levels and when used with liquid epoxy resins.