塗料&コーティング

DAOTAN VTW 1686/40WA is used as sole binder or in combination with melamine resins and/or polyurethane dispersions for the production of waterdilutable industrial paints, e. g. base coats.

BECKOPOX EP 387W/52WA is an internally plasticized solid resin-Type 1-dispersion with improved shear stability, e. g. for water reducible fast drying anticorrosion primers and coatings for plastics.BECKOPOX EP 387W/52WA is an internally plasticized type 1solid epoxy resin as aqueous dispersion. Formulated together with adequate curing agents such as e. g. Beckopox VEH 2188w/55WA it is suited for corrosion protection primers with very good adhesion to most metallic substrates. It is also suitable for use in single coat and decorative systems for metallic substrates. For optimium corrosion protection it is recommended using 75 % of the stoichiometric curing agent quantity. Dispersion of pigments and fillers can be done in Beckopox EP 387w/52WA if the temperature does not exceed 40 °C. The formulated paint stability can be influenced by the additives used so that it is important to investigate their suitability thoroughly, such additves should not contain functional groups capable of reacting with epoxy groups.

BECKOPOX EP 384W/53WAMP is a solid resin-Type 1-dispersion, even in combination with water-emulsifiable liquid resins for fast drying coatings, preferably for mineral substrates. BECKOPOX EP 384W/53WAMP is a type 1 solid epoxy resin as aqueous dispersion. Formulated together with suitable curing agents such as Beckopox EH 623w, EH 659w or VEH 2177w it results in rapid drying coating systems for mineral substrates. The rapid drying property makes it possible to apply more coats within one working day. Dispersing of pigments and fillers can be carried out often in Beckopox EP 384w/53WAMP if the temperature does not exceed 40°C. The formulated paint stability can be influenced by additives, the additives should not contain functional groups capable of reacting with epoxy groups.

BECKOCOAT PU 428/51XMPAC is a rapid curing. Radiant brilliance. Superior abrasion resistance. Outstanding impact resistance, excellent adhesion. Floor sealers, wood coating, concrete impregnation. Crosslinker for alkyd resins in two-component systems.The extreme abrasion resistance, impact resistance, and chemical resistance make Beckocoat PU 428 films cured with the action of air humidity an excellent sealer and impregnation medium for concrete, a binder for non-slip coatings, for concrete coatings resistant to fuel oil and abrasion, for instance in garages, or for floorings and coatings for walls and ceilings in laboratories, chemical factories, etc. The films cure to radiant brilliance and can also be recommended for wooden floors subject to heavy wear like in bowling alleys, roller skating rinks, dancing halls, gymnasiums and schools. Beckocoat PU 428 has also proved an ideal vehicle for coating sports articles like spears, bowling pins, golf balls, bats, hockey sticks, tennis rackets, etc. In exterior use, Beckocoat PU 428 will lose gloss and will yellow. Weather resistance and gloss retention can be enhanced through coemploying alkyd resins like VIALKYD AR 408.