Vernici e rivestimenti

VIALKYD AY 402/50X is an extremely fast initial and through drying. Excellent recoatability at any time. Excellent adhesion to steel and aluminium. Superior protection against corrosion Excellent water resistance. Anticorrosive primers. Spraying fillers, knifing and spray putties. Air-drying and forced drying industrial and machinery paints. VIALKYD AY 402/50X is an air-drying acrylic modified phthalic resin with specific properties owing to additional modification with isocyantes. VIALKYD AY 402 is primarily used sole binder in the formulation of anticorrosive primers, and putties and for air drying and forced drying industrial enamels and machinery paints. Anticorrosive automobile primers Primers based on VIALKYD AY 402 show extremely rapid set and through drying, excellent recoatability at any time with VIALKYD AY 402 or other paints containing aggressive solvents. The compatibility with basic pigments affords formulation of zinc chromate primers and primer fillers with excellent perfomance, particularly in terms of superior corrosion resistance, mechanical properties and water resistance. It is also possible to formulate zinc chromate free primers on base of zinc phosphate.Spraying fillers and spraying putties VIALKYD AY 402, in spray putties and fillers, exhibits quick drying and thus quick sanding and excellent adhesion to steel and aluminium. VIALKYD AY 402 has excellent recoatability and gives very good surface without lifting. Industrial paints In the formulation of industrial and machinery paints, with adequate pigmentation VIALKYD AY 402 affords radiant gloss, extremely rapid drying, excellent adhesion to steel and non-ferrous metals. The paints can be forced-dried at 60 - 100 °C. With curing temperatures of from 60 °C upwards no driers are required.

VIALKYD AC 290/70MPAC has an excellent compatibility characteristics with alkyd stoving paints, thermosetting acrylic paints, NC-lacquers, acid curing enamels, alkyd- or acrylic-isocyanate enamels. Grinding resin for pigment pastes. VIALKYD AC 290 has been designed as grinding resin in the formulation of pigment pastes which have full compatibility with alkyd stoving paints, thermosetting acrylic paints, nitrocellulose enamels and acid curing enamels, alkyd- or acrylics- polyiscoyanate combinations. The pastes can be reduced with the respertive resins and give paints with the performance of irrelevant modified basic paint properties. VIALKYD AC 290 has a balanced functionality and is fully integrated into the cured film. Therefore, it must be fully considered as resin component for reaction with amine resins, polyisocyanates, nitrocellulose systems and acid curing systems. Up to a resin proportion of 30 % of VIALKYD AC 290, the performance of the binder resin is not influenced adversely. VIALKYD AC 290 shows yellowing resistance up to 30 min / 200 °C and acts up favourably to top quality alkyd resins. Solvent resistance is not adversely affected. At low curing temperatures, VIALKYD AC 290 shows good crosslinking and is thus also suitable for quick stoving 80 °C enamels. Owing to the excellent performance of VIALKYD AC 290 in a variety of paint formulations and due to the fact that VIALKYD AC 290 does not subdue the characteristics of the main binder, paint preparation can be substantially rationalized with this new grinding medium.

VIALKYD AM 764/70WS has an extremely good resistance to weather and water. Easy to brush, high build. Radiant brilliance, good gloss retention. Exterior wood paints, and wood stains. Clear varnishes, yacht varnishes. Anticorrosive systems. VIALKYD AM 764 is designed as sole binder for the formulation of top grade wood enamels and stains. High build trade paints can be produced from VIALKYD AM 764 in conjunction with non-yellowing alkyds. Clear varnishes and glazes (exterior wood stains). VIALKYD AM 764 excels in weather resistance and thus recommends itself as sole binder for clear varnishes, wood stains and glazes. Furthermore, VIALKYD AM 764 shows excellent wood penetration and big ease of application. Clear varnishes on VIALKYD AM 764 exhibit good gloss retention and have no tendency to cracking, owing to durable flexibility. Yacht varnishes Besides superior weather resistance VIALKYD AM 764 exhibits excellent water resistance. These properties allow the formulation of varnishes subject to continued impact of UV-light and water, such as for yachts and other boats. Trade paints and industrial paints VIALKYD AM 764 imparts excellent build and gloss to trade paints. Owing to its yellowing tendency, for white paints it is used in conjunction with non-yellowing alkyd resins. As combination partner VIALKYD AM 764 markedly improves brushability and flow. Metal primers and finishes can be also formulated from VIALKYD AM 764. These paints are used in cases where requirements regarding weather resistance and gloss retention are high.

VIALKYD AV 608/60WS is easy to use, excellent weather resistance, good water and corrosion resistance, high gloss. Sole binder for aluminium paints with brilliant effect and good gloss retention. Used for zinc dust paints, mica iron paints, and anticorrosive paints. VIALKYD AV 608 is a styrene-modified oil which is characterized by high resistance to water and corrosion. In aluminium-pigmented paints it yields a brilliant effect, good gloss retention and excellent weather resistance. It is used as sole binder for high-build, readily brushable, air drying aluminium, zinc dust and mica iron paints, zinc chromate primers, and lead and chromate-free ground coats. On account of its high degree of water resistance it is used for paint coating of steel structures such as oil and gas tanks, hall and brigde constructions, etc. VIALKYD AV 608/60WS may show some cloudiness, which, however, does not influence the technical properties of the paint.