Paints & Coatings

HALOX® FLASH-X® 330 is an effective, nitrite-free, liquid additive used in the manufacture of waterborne protective coatings for inhibition of flash rust and in-can rusting and has demonstrated excellent flash rust inhibitive performance on a variety of metal substrates without the use of nitrites.

HALOX® CW-291 is white, nonrefractive, corrosion inhibiting pigments used in protective coating systems. They are not recommended for use in immersion or semi-immersion environments. HALOX® CW-291 has the lowest oil absorption of our borosilicate products and is recommended for use in protective coating systems based on alkyd technology. Because of its low oil absorption, HALOX® CW-291 is specifically suggested for use in high solids, medium gloss topcoats, DTM (direct-to-metal) finishes and self priming systems. HALOX® CW-291 is compliant to ASTM D 4288-83, Specification for Calcium Borosilicate Pigment Type 1, Class B. HALOX® CW-291 recommended loading levels range from 5-10% based on total formula weight in primer systems and 2-5% based on total formula weight in topcoat and DTM finishes. PVC levels should range from 40-45% in primers and 15-25% in topcoats and DTM’s.

SETAL 41-1390 is a water-reducible alkyd resin recommended for industrial finishes cured by bake, air-dry, or force-dry methods. It exhibits very fast drying properties, good corrosion resistance, and low application viscosity.

VYLON SS-2510 is a high-molecular polyester resin that dissolves in general-purpose organic solvents.