ADDITOL XL 180 enhances intercoat adhesion of stoving paints and fast drying air-drying paints on electrodeposition primers, white electrodeposition paints and primers. ADDITOL XL 180 is dilutable with aliphatic and aromatic hydrocarbons,ketones, esters and alcohols, and is in its form of delivery not dilutable with water. ADDITOL XL 180 improves intercoat adhesion between finish and primer. ADDITOL XL 180 has excellent compatibility characteristics with many binder systems and thus affords universal use. In water dilutable systems ADDITOL XL 180 is best used neutralized with amines, preferably triethylamine. Effects of ADDITOL XL 180 are increased adhesion and enhanced flexibility of stoving alkyd or acrylic resin paints to primers and white paints applied b electrodeposition. In single coats on iron and aluminium, ADDITOL XL 180 does not seem to be efficience. ADDITOL XL 180 as well as its salts can be combined with non-ionic and anionic substances with interfacial activity. Compatibility with cationic substances, however, should be checked individually to prevent mutual flocculation and reduction of gloss. Experience so far has neither shown impaired weathering resistance nor reduced storage stability in connection with the use of ADDITOL XL 180.

DOWSIL™  Z-6121 SILANE is a silane adhesion promoter made from 62% active and 34% solids in alcohol. DOWSIL™  Z-6121 SILANE display the benefits of eliminating the oven cure normally required to develop optimum properties, improves adhesion and salt-spray resistance of epoxy coatings and to improves adhesion of Alkyd finishes to glass. DOWSIL™  Z-6121 SILANE is suitable to use in epoxy coating, silicone resin based coatings and alkyd coatings.

XIAMETER™ OFS-6020 Silane is made from Diaminofunctional silane, and functions as a coupling agent.

XIAMETER™ OFS-6020 Silane possesses both organic and inorganic reactivity. XIAMETER™ OFS-6020 Silane can react with organic polymers and glass or other inorganic mineral surfaces.

XIAMETER™ OFS-6020 Silane offers the benefits to improve adhesion and increase wet and dry tensile strength, flexural strength & compressive strength and Improved compatibility between inorganic filler and organic polymer.

XIAMETER™ OFS-6020 Silane is recommended to use in clay-reinforced elastomers such as natural and nitrile rubber, mineral-reinforced nylon 6, nylon 6/6 and polybutylene terephthalate, fibreglass finish or as resinous additive and thermoset resins.

Please see the specification sheet below and for further details contact our local sales representative today.