VIACRYL VSC 6276W/44WA can be crosslinked with reactive melamine resins such as Cymel 325 or Cymel 327 to give less-yellowing industrial coating systems with good gloss. The curing schedule is 30 min/120 °C - 20 min/140 °C. In comparison with Viacryl VSC 6273w/44WA, Viacryl VSC 6276w/44WA doesn't contain a built in catalyst so that it doesn't loose flexibility when overbaked.

SETALUX 1385 BX-51 is used as thermosetting hydroxylated acrylic copolymer for combination with amino resins. good compatibility with cellulose aceto-butyrate resins. Basecoat for wet-on-wet sytems especially automotive topcoats.

DAOTAN VTW 1686/40WA is used as sole binder or in combination with melamine resins and/or polyurethane dispersions for the production of waterdilutable industrial paints, e. g. base coats.

BECKOPOX EP 387W/52WA is an internally plasticized solid resin-Type 1-dispersion with improved shear stability, e. g. for water reducible fast drying anticorrosion primers and coatings for plastics.BECKOPOX EP 387W/52WA is an internally plasticized type 1solid epoxy resin as aqueous dispersion. Formulated together with adequate curing agents such as e. g. Beckopox VEH 2188w/55WA it is suited for corrosion protection primers with very good adhesion to most metallic substrates. It is also suitable for use in single coat and decorative systems for metallic substrates. For optimium corrosion protection it is recommended using 75 % of the stoichiometric curing agent quantity. Dispersion of pigments and fillers can be done in Beckopox EP 387w/52WA if the temperature does not exceed 40 °C. The formulated paint stability can be influenced by the additives used so that it is important to investigate their suitability thoroughly, such additves should not contain functional groups capable of reacting with epoxy groups.