SETAL 1201 SM-50 is Good hardness, fast drying and abrasion resistant. It is used as decorative varnishes.

SETAL 142 XX-60 LC is very fast drying, good elasticity and yellowing resistance (also at elevated temperature), good adhesion on steel. It is used as fast drying industrial topcoats. Fast drying corrosion resistant primers. General purpose stoving enamels.

SETAL 199 SS-55 is a good drying properties, very good body, good colour, gloss retention and exterior durability. It is used as auto-repair enamels, Enamels for cars, trucks and buses, Enamels for tractors and agricultural equipment, Air-drying industrial enamels.

VIALKYD AY 402/50X is an extremely fast initial and through drying. Excellent recoatability at any time. Excellent adhesion to steel and aluminium. Superior protection against corrosion Excellent water resistance. Anticorrosive primers. Spraying fillers, knifing and spray putties. Air-drying and forced drying industrial and machinery paints. VIALKYD AY 402/50X is an air-drying acrylic modified phthalic resin with specific properties owing to additional modification with isocyantes. VIALKYD AY 402 is primarily used sole binder in the formulation of anticorrosive primers, and putties and for air drying and forced drying industrial enamels and machinery paints. Anticorrosive automobile primers Primers based on VIALKYD AY 402 show extremely rapid set and through drying, excellent recoatability at any time with VIALKYD AY 402 or other paints containing aggressive solvents. The compatibility with basic pigments affords formulation of zinc chromate primers and primer fillers with excellent perfomance, particularly in terms of superior corrosion resistance, mechanical properties and water resistance. It is also possible to formulate zinc chromate free primers on base of zinc phosphate.Spraying fillers and spraying putties VIALKYD AY 402, in spray putties and fillers, exhibits quick drying and thus quick sanding and excellent adhesion to steel and aluminium. VIALKYD AY 402 has excellent recoatability and gives very good surface without lifting. Industrial paints In the formulation of industrial and machinery paints, with adequate pigmentation VIALKYD AY 402 affords radiant gloss, extremely rapid drying, excellent adhesion to steel and non-ferrous metals. The paints can be forced-dried at 60 - 100 °C. With curing temperatures of from 60 °C upwards no driers are required.