SILIPORITE® NK 30 AP can be used for all purposes where a drying agent, easy to use and of high efficiency is needed : BUILDING : - Double glazing desiccant to avoid water and solvent condensation while minimizing nitrogen desorption. - Polyurethane formulation (paints, glue, sealant) for the application where foaming should be avoided. FINE CHEMICALS / PHARMACEUTICALS : Modification for chemical equilibrium reactions by water adsorption provided that solvent is not absorbed by Molecular sieves SILIPORITE®.

SILIPORITE® NK 10 AP can be used for all purposes where a drying agent, easy to use and of high efficiency is needed : BUILDING: Polyurethane formulation (paints, glue, sealant) for standard application. paints based on metallic pigments (zinc, aluminium), epoxy resins curing at cold temperature. FINE CHEMICALS / PHARMACEUTICALS: Modification for chemical equilibrium.

SILIPORITE® SA 1720 can be used for all purposes where a drying agent, easy to use and of high efficiency is needed. BUILDING: Polyurethane formulation (paints, glue,sealant) for the application where foaming should be avoided and pot life optimised.

INCOZOL® 2 acts as an effective moisture scavenger in polyurethane coatings and sealants. It is used to eliminate moisture from solvents, polyols and prepolymers and also from plasticisers and pigments. It removes residual moisture from the formulation and prevents bubbling and downglossing caused by high moisture levels either on the substrate or from the atmosphere. INCOZOL® 2 is used in one or two component systems but is not generally recommended in one component systems with a low NCO content.