Polimeri

Deuteron ES 222 is a surface active additive. Its presence in a mixture of unsaturated polyester resin/reactive-solvent (styrene) helps in re­moving air-bubbles. This applies in particular after mixing resin and curing agent. Technologically useful is the improved wetting of the substrate, thus making it easier to release air bubbles from the substrate’s surface.

Because of the above mentioned properties Deuteron ES 222 is an effective wetting and air release agent in particular for laminating resins based on unsaturated polyester. The product is very suitable in laminating resins where excellent adhesion of polyester resins and glass fiber is required. Deuteron ES 222 is also very suitable as an air release agent in other systems based on unsaturated polyester resins.

EPOXY NPEL-127E is an undiluted resin with a lower viscosity than NPEL-128E but providing similar properties after cure. Cured with polyamine or polyamide, it offers quality and high purity properties in applications, such as maximum mechanical strength, good chemical resistance and excellent heat resistance, etc. Because its low chloride content, NPEL-127E is more suitable for electronic application.

EPOXY NPEL-128E is a high purity liquid resin, which is manufactured from bisphenol-A and epichlorohydrin. It is recognized as standard form which variations have been developed. Cured NPEL-128E always offers quality and high purity properties in applications, such as maximum mechanical strength, good chemical resistance and excellent heat resistance, etc.