American Coatings Show 2026 - Architectual Coatings

HALOX® 580 is a sustainable, ultra-low VOC (<0.5%), bio-based liquid corrosion inhibitor designed for protection of water-based, solvent-based, high solids, 100% solids paints, direct-to-metal (DTM) coatings. It is suitable for thin-film coatings, 1K acrylic emulsions, 2K epoxies, water reducible alkyds, 2K polyurethanes, alkyds, urethane alkyds, etc. With 50% bio-content, HALOX® 580 provides a cost-effective, environmentally friendly solution for corrosion protection while maintaining formulation flexibility, as it can be post-added or incorporated during the letdown phase.

HALOX® 580 is a clean-label inhibitor, free from heavy metals, APEO, and HAPS, making it non-hazardous for shipping and transportation, ultimately reducing costs and regulatory concerns. Engineered for both waterborne and solvent-borne paints, HALOX® 580 enhances adhesion and water resistance, minimizing osmotic blistering while maintaining good shelf stability. Its organophosphate and bio-based solvent carrier provides a synergistic boost to traditional anticorrosive pigments, improving overall coating performance. Non-flammable and with minimal gloss impact, it is an ideal choice for high-solids primers, topcoats, and eco-label-compliant coatings across various resin systems, including acrylic, epoxy, urethane, and alkyds.

HALOX® 350 is a more active 97-100% solids organic corrosion inhibitor designed to stop flash rust, and in-can corrosion, and provide temporary corrosion protection. HALOX® 350 is an effective replacement for toxic nitrite-based flash rust inhibitors.

HALOX CW-314 is a non-toxic, heavy metal free anti-corrosive pigment designed for use in water-borne and solvent-borne protective coating systems. It is especially suited for systems where 21 CFR 175.300 approval or conformance to ANSI/NSF standards are required.

HALOX® FLASH-X® 150 is used in the manufacture of water-base protective coatings as an effective liquid additive for inhibition of flash rust and in-can rusting. Testing has shown that HALOX® FLASH-X® 150 is highly effective at relatively low loading levels as compared to other flash and in-can rust inhibitors. HALOX® FLASH-X® 150 has demonstrated excellent flash rust inhibitive performance on various metal substrates ranging from iron, steel, and galvanized iron to galvalume and zincalume. Evaluations have shown HALOX® FLASH-X® 150 to be effective for inhibiting in-can rusting in lined and unlined metal containers. HALOX® FLASH-X® 150 is compatible with a variety of latices without causing film sensitivity or package stability problems that can occur with other flash rust additives. HALOX® FLASH-X® 150 is also an effective additive for stabilizing metal substrates when using the water-blasting method of surface restoration. HALOX® FLASH-X® 150 is easy to use and can be incorporated at any stage of coating manufacture. HALOX® FLASH-X® 150 can also be easily and effectively post added to any coating system; however, as with any additive, compatibility should be checked prior to use.

EVERSORB® AQ2 is a liquid type UV light stabilizer blending for cationic system waterborne coatings. It is suitable for coatings under high baking temperature and extreme conditions. The product is able to use with waterborne systems directly.

Eversorb® AQ7 is a blending performance liquid UV light stabilizer for waterborne UV curable coatings. It can prevent to degrade from sunlight UV radiation. The most important thing is no impact on the cure speed and easy to disperse in waterborne UV curable coatings. Eversorb® AQ7 is a versatile light stabilizer, which can be used in wide varieties of waterborne clear and pigmented UV curable coating system. It recommended for metal, wood and plastic materials.

Eversorb® AQ 11 is a liquid blend of light stabilizers for waterborne coatings. It has high photo permanence. Eversorb® AQ 11 is specific for high clarity waterborne formulation and mixed with water is transparent.

PLIOTEC DPR 50 is a next-generation all-acrylic resin engineered for superior dirt pick-up resistance and cleanability, helping exterior coatings maintain a cleaner appearance with minimal maintenance. Ideal for vertical exterior architectural and masonry applications, it offers excellent adhesion, early rain resistance, long-term durability, and weatherability. The formulation is free from surface-modifying additives like silicones and benzophenone, and contains no APEO surfactants or intentionally added PFAS. Its low-VOC capability supports compliance with stringent environmental regulations.

WANNATE® HT-90BSplus can be used as the hardener component for lightfast two-component polyurethane coatings with high resistance to chemicals and weathering, very good gloss retention and outstanding mechanical properties. Preferred co-reactants are polyacrylates or polyester polyols. The main applications for coatings based on WANNATE® HT-90BSplus are automotive refinishing, transportation, industrial finishing and plastics.