DKSH Performance Materials Canada | Authorized Partner for Dow™ RHOPLEX™ Binders

Features and Benefits - Formulation flexibility—RHOPLEX™ 3479 Floor Finish Polymer offers formulating flexibility to make a range of performance profiles from minimum maintenance to maximum burnish response. - Gloss—Properly formulated polishes based on RHOPLEX™ 3479 Polymer are an excellent choice for high profile floor areas where an extremely high gloss look is desirable. Supermarkets and retail stores are good examples of this type of application. - Foam control—Since RHOPLEX™ 3479 Polymer is a low foaming polymer, properly formulated polishes made with RHOPLEX™ 3479 Polymer exhibit less foam in the bucket and during application than most conventional polishes.

RHOPLEX LA-501 is a high-solids, 100% acrylic latex polymer developed to offer excellent bulk water resistance and optimal vapor permeability when formulated into a water-resistive and/or air barrier coating. Optimized RHOPLEX LA-501 formulations exhibit excellent weatherability and mechanical properties when applied on a wide variety of substrates.

RHOPLEX™ EC-2848 아크릴 폴리머 에멀젼은 넓은 온도 범위에서 연신율, 인장 강도 및 먼지 유입 저항의 우수한 균형을 가진 엘라스토머 코팅을 제공하도록 설계되었습니다. 폴리머의 연신율 특성으로 인해 코팅은 파열 없이 치수가 불안정한 균열을 연결할 수 있습니다. 또한 먼지 집김 저항을 희생하지 않고 저온과 고온 모두에서 인성과 탄성의 탁월한 균형을 제공합니다. RHOPLEX™ EC-2848 기반 코팅은 시간이 지나도 매력적인 외관을 유지합니다.

RHOPLEX™ AS-48은 아크릴-스티렌 폴리머로 56 중량 %의 고형분으로 물에 공급됩니다. 시멘트질 모르타르에 RHOPLEX™ AS-48을 사용하면 유연성이 향상됩니다. 이 폴리머로 개질된 경화 모르타르는 또한 우수한 내수성과 다양한 기판에 대한 접착력을 가지고 있습니다.

RHOPLEX™ AC-630 에멀젼은 견고한 방수 실러를 위해 설계된 전체 아크릴 폴리머입니다. 이러한 코팅은 일반적으로 통제된 제조 조건에서 형성된 경화된 시멘트질 제품의 백화를 지연시키기 위해 공장에서 적용됩니다.

RHOPLEX™ E-330 포틀랜드 시멘트 조성물을 개질하기 위해 설계된 아크릴 폴리머. 이 제품과 혼합 된 시멘트 모르타르는 단단하고 견고하며 내구성이 있습니다.

RHOPLEX™ EC-2885 latex was developed as a high performing, high tensile strength polymer that, when formulated into a quality elastomeric roof coating formulation, delivers improved toughness, hail resistance and roof traffic protection while maintaining excellent elastomeric properties. Coatings based on RHOPLEX™ EC-2885 also exhibit excellent adhesion to polyurethane foam and a variety of other construction and roofing substrates, and can exceed the expected tensile strength of typical acrylic roof coatings, as well as provide excellent durability, flexibility and dirt pickup resistance.

RHOPLEX™ TR-520은 목재, 금속 및 콘크리트를 포함한 광범위한 기판에 대한 우수한 접착력을 제공합니다. 건설 프로젝트, 가구 조립 또는 DIY 공예품 작업 등 어떤 작업을 하든 이 다용도 접착제는 안정적이고 오래 지속되는 접착력을 보장합니다.

RHOPLEX™ MC-76 시멘트 개질제는 분무 가능한 모르타르 및 패치 모르타르 응용 분야 모두에 사용할 수 있습니다. 이 아크릴 폴리머는 외부 단열 및 마감 시스템(EIFS), 베이스코트 및 접착제, 스프레이 가능한 치장 벽토 유형 코팅과 같은 스프레이 가능한 시멘트질 조성물을 위해 설계되었으며 다양한 표면에 적용할 수 있습니다. 올바르게 적용하면이 수정자는 오래된 콘크리트 및 석조물, 벽돌, 목재, 금속 및 기타 여러 표면에서 잘 작동합니다.

RHOPLEX™ MC-1834P는 포틀랜드 시멘트 조성물을 개질하기 위해 설계된 저취 아크릴 폴리머 에멀젼입니다. 또한 기존 콘크리트에 대한 새 콘크리트의 접착력을 향상시키기 위해 라텍스 결합제로 사용할 수 있습니다. RHOPLEX™ MC-1834P는 섹션이 얇고 진동이 심하며 교통량이 많은 어플리케이션에 특히 유용합니다. 올바르게 적용하면 이 개질제는 콘크리트, 석조, 벽돌, 목재, 유리, 금속, 경질 폴리스티렌 및 폴리우레탄 폼에 잘 작동합니다.

RHOPLEX™ EI-6000 polymer emulsion is a 100% acrylic binder designed for use in formulating clear matrix aggregate finishes for exterior insulation and finish systems (EIFS), clear sealers for granule-coated metal roof tiles, and primers and basecoats for elastomeric roof coatings. It offers excellent resistance to water blushing (or water whitening) when used on exterior surfaces. RHOPLEX™ EI-6000 also has excellent overall durability to weathering, excellent adhesion to a variety of substrates and good dirt pickup resistance.

RHOPLEX™ EC-2540 is an all-acrylic polymer designed for use in a white protective coating to extend the life of existing roofs. Coatings based on RHOPLEX™ EC-2540 are an excellent choice for use over asphaltic substrates, providing an environmentally friendly water-based alternative to solvent-based aluminized asphalt roof coatings. In addition, RHOPLEX™ EC-2540 offers excellent flexibility and adhesion while resisting damage due to UV light, asphalt staining and dirt pickup.

RHOPLEX™ EC-2020 Emulsion is an all-acrylic polymer designed for use in elastomeric roof coatings. Products made with RHOPLEX™ EC-2020 Emulsion exhibit excellent flexibility and dirt pickup resistance, reliable asphalt bleed resistance, and strong adhesion to common roofing materials, including polyurethane foam, metal, concrete.

RHOPLEX™ EC-1791 Water based 100% acrylic emulsion specifically designed for elastomeric roof and wall coating with outstanding adhesion to wide range of substrates and good water ponding resistance.

Coatings formulated with RHOPLEX™ CS-4000 Emulsion Polymer offer the following performance features: Excellent resistance to water blushing, low water pickup, early block resistance, low coalescent demand, good exterior weatherability and reduced water vapor permeability.

RHOPLEX™ AC-1034 Emulsion is an acrylic copolymer with a unique hydrophobic composition which imparts excellent water resistance as well as a high degree of flexibility to industrial coatings. It is designed for use in edge sealers on wood and wood composite substrates such as plywood and oriented strand board (OSB), and facilitates products with good resistance to edge swelling. RHOPLEX™ AC-1034 Emulsion offers very good compatibility with high levels of waxes which are often used in edge sealer products. It can also be used in formulating clear primer or sealer coatings to provide water resistance

RHOPLEX™ A-920 is a high solid, high-performance acrylic latex binder designed for pigmented caulks and sealants. Due to the self-thickening nature of this binder, RHOPLEX™ A-920 has a lower thickener demand than other sealant binders. With its high pigment binding capacity, RHOPLEX™ A-920 can be successfully formulated into a broad range of products – from economical non-spec caulks to high-performance sealants. Sealants formulated with RHOPLEX™ A-920 exhibit excellent durability and exceptional adhesion.

RHOPLEX™ 928 is a high-solids acrylic copolymer emulsion that can be used as a binder for both clear and pigmented sealant formulations. Clear sealants formulated with RHOPLEX™ 928 exhibit exceptional clarity, rate of clarity development and water resistance. Pigmented sealants based on RHOPLEX™ 928 can be formulated to meet ASTM C834 and to have the paint crack resistance properties painters require. Both clear and pigmented sealants formulated with RHOPLEX™ 928 have excellent adhesion to a wide variety of substrates.

RHOPLEX™ 1950 acrylic emulsion is a high solids (63%) Dow binder designed specifically for high-performance sealants and patching compounds. The RHOPLEX™ 1950 acrylic emulsion allows the formulator to produce a flexible sealant without the addition of an external plasticizer.

RHOPLEX™ EI-2000 is a versatile 100% acrylic polymer designed for use as a binder for exterior insulation and finish systems (EIFS) and as a cement modifier. Because it is cement-compatible, it offers excellent performance in EIFS cementitious basecoats and adhesives. Due to its 100% acrylic composition, it imparts good exterior durability.

RHOPLEX™ AC-261LF 아크릴 에멀젼 폴리머는 라텍스 바닥 페인트 용 전체 아크릴 에멀젼 폴리머입니다. 접착력과 내마모성은 이 용도를 위해 설계되었습니다. 또한 고품질 외부 반광택 트림 페인트에도 적합합니다.

RHOPLEX™ WL-91 에멀젼은 금속, 콘크리트, 플라스틱 및 목재 기판의 수성 투명 및 안료 산업용 마감재를 위해 설계된 경질 아크릴-스티렌 공중합체입니다. 상온 및 강제 건조 산업용 프라이머 및 래커 모두에 적합한 RHOPLEX™ WL91 에멀젼은 매력적인 외관, 우수한 내화학성 및 내용제성, 경도, 접착력 및 내식성을 갖춘 코팅의 제형을 용이하게 합니다.