Let LUNA take your Powder Coatings to the next level!

Luna-matt 71 is a reactive matting agent, based on carboxyl-functional acrylic resin. It can be used in hybrid powder coatings to ahieeve low gloss levels whilst maintaining mechanical and colour properties.

Luna-add 1096 is a Teflon-free texture additive for powder coatings, capable of complying with REACH EU regulation (EC) No 1907/2006 and similar regulations. Luna-add 1096 provides a rough structure effect (similar to a sand texture effect) in powder coatings. It enables excellent anti-scratch performance, and can be used with epoxy, polyester or hybrid resin systems.

Benefits:

• Teflon-free
• Meets the requirements of relevant EU regulations
• Eliminates fingerprint-effect
• Improves edge covering
• Unsurpassed texture uniformity
• Excellent scratch resistance

Luna-add 201 is a pre-mixed material for creating glycouril/hydroxyl terminated polyester-based powder coating with alligator finishes. Luna-add 201 does not contain any pigment, which helps to keep texture consistency and better quality control. Formulators only need to add pigments into the mix, then dry blend, extrude, grind and classify, to achieve a powder coating with outstanding alligator finish.

Luna-add 801 is a pre-mixed material for formulating clear-top powder coatings with a snowflake effect. The finished powder coating formulated with this pre-mixed material is very easy to spray onto any pigmented primers (powder or liquid paint) and then by baking this colour plus clear-top dual coatings you will form a consistent snowflake pattern.

Luna-cat 7318 is an anti-yellowing, low temperature curing accelerator for powder coatings based on PES/TGIC and PES/hybrid.

Luna-charge 2485 is a polar fatty acid derivative used as a charge enhancing additive to improve the transfer efficiency of powder coatings.

Luna-cryl 700 is a glycidyl functional acrylic resin which can be used as a curing agent for saturated carboxyl polyesters having low acid values (i.e. 33) to produce exterior durable Powder Coating with dead matte to low gloss finishes (60° gloss range 0-20).

Luna-cryl 710 is a glycidyl functional acrylic resin which can be used as a curing agent for saturated carboxyl polyesters having low acid values (i.e. 33) to produce exterior durable Powder Coating with dead matte to low gloss finishes (60° gloss range 0-20). Luna-cryl 710 offers improved flexibility as compared to its predecessor, Luna-cryl 700.

Luna-fos 126J is a high performance organophosphie processing stabilizer which protects coatings from thermo-oxidative degradation by decomposing hydroperoxides to form non-radical, non-reactive products.

Luna-fos 168-J is a solid phosphite antioxidant with excellent hydrolytic stability. Recommendcd for use in combination with amine/phenolic antioxidants. Luna-fos 168-J functions synergistically to retard oxidative degradation of most polymeric substances during polymerization, processing, and in end-use applications. For those polymers resistant to oxidation, Luna-fos 168-J can be used alone to maintain optimal color stability.

Luna-matt 019 is a polyolefin wax based matting agent, used mainly in polyester/TGIC exterior-durable powder coatings, to provide gloss levels lower than 15%. Luna-matt 019 provides excellent color stability and flow, especially in black or darkshades.

Luna-matt 216 is a synthetic resin-based matting agent designed for reducing gloss in exterior polester/TGIC powder coatings whilst maintaining flow and weather resistance properties.

Luna-mer 1174 is a glycoluril type hardener used to produce Powder Coating having extremely consistent wrinkle finishes regardless of the color or filler content. Luna-mer 1174 can be used for exterior durable or indoor applications.

Luna-mer 2067 is a matting agent designed for use in exterior polyester/TGIC powder coatings, to provide reduced gloss and improved flow and anti-yellowing. Luna-mer 2067 can usually lower gloss levels to ~30% (60°).

Luna-mer 2148 is a wax-free matting hardener, designed for use in durable exterior TGIC powder coatings. Luna-mer 2148 is capable of providing gloss ranges from 10-30% @ 60°. Due to its carboxyl group functionality, this hardener requires excess TGIC as a co-reactant in order to achieve controllable gloss stability at varying baking temperatures. Luna-mer 2148 also provides excellent performance characteristics including impacts and surface flow.

Benefits:

• Wax-free, thus avoiding negative effects
• Low polyester selectivity
• One shot, gloss stable in varying temperature conditions
• The lowest gloss ca. 10%
• Excellent flow & surface fineness
• Excellent impact properties
• Good exterior durability

Luna-mer 2165 is a matting agent for polyester epoxy hybrid Powder Coating and can be used to produce coatings that have a 60° gloss range between 15-70 units. Cured films that contain Luna-mer 2165 offer excellent flow, outstanding anti-yellowing properties and very good fingerprint resistance.

Luna-mer 552-A is a β-hydroxyalkylamide crosslinker, used to formulate exterior-durable, TGIC-free powder coatings.

Luna-mer 553-A is an improved β-hydroxyalkylamide crosslinker, used to formulate exterior-durable carboxylic polyester powder coatings. Luna-mer 553-A provides a lower-yellowing, more colourstable coating, and therefore is most suitable for use in direct-fired gas ovens.

Luna-mer 554-A is a new lowfunctionality crosslinker for powder coatings. Luna-mer 554-A is comes in easy-to-incorporate powder form, and provides superior properties to the final coating.

Benefits:

• Provides superior flow and higher film thickness
• Improves weather resistance
• Excellent oven and overbake (colour) stability
• Excellent gas-out properties

Luna-mer B-31 functions as a hardener or accelerator for powder coatings and partially replaces dicyandiamide in formulations.

Luna-mer B-31 appears in a white to pale yellow flake form.

Luna-mer MB-55 is a cross-linkable matting agent for epoxy and epoxy/polyester powder coatings, that provides consistent, low gloss levels when cured at temperatures above 180℃.

Luna-mer B-68 is a cross-linkable matting agent for epoxy and epoxy/polyester powder coatings, that provides consistent, low gloss levels when cured at temperatures above 180℃.

Luna-mer BPOA is a versatile additive, that acts as a polymerization extender for nylon polymers, an extreme pressure additive for lubricants, or as a flame retardant for fibres.

Luna-mer DDA is a dibasic acid that can be used as a powder coating curing agent with GMA-functional acrylic resins. Luna-mer DDA is the hardener of choice for GMA resins due to the combination of favorable melting point, cure rate and viscosity reduction. Luna-mer DDA offers cured coatings with outstanding clarity, non-yellowing properties, chemical resistance and exterior durability.

Luna-mer SA2165 D is a synthetic resin based matting agent for hybrid powder coating. It can be cured over a wide temperature range and can be formulated with a full range of carboxyl functional polyesters. Luna-mer SA2165 D can be used to produce coatings that have a 60° gloss range from 5-60 units and offers excellent flow and anti-yellowing properties.

Luna-nox 1076-J is a hindered phenol antioxidant, widely used in polymers including polypropylene, polyethylene, polystyrene, polyamide, ABS, and synthetic rubbers. It is also an effective antioxidant in oils and paints.

Luna-nox 1076-J is odourless, tasteless, low toxicity (LD50≥10000mg/kg) and light-stable, and is recommended for use at 0.1 – 0.3% dosage rate.

Luna-nox B900J is a specialised blend (1:4 ratio) of a phenolic antioxidant with a secondary phosphite costabilizer antioxidant. Luna-nox B900J provides longlasting protection against oxidationin a variety of polymers such as polyefins (PE and PP), polyamides, polycarbonates, PBT and ABS.

Luna-sorb 1990 is a highly efficient, UV absorber developed for solvent based coatings and polymers requiring strong protection both in the UVA and visible light range. Luna-sorb 1990 is specifically developed for solvent based coatings with good solubility with common organic solvents. It also provides long lasting protection for various organic polymers with excellent compatibility to meet exterior applications, particularly for the requirement of extended absorption range into longer wavelengths and visible light. It represents a major milestone with the following advantages:

• Red shifted UV absorber, up to 440 nm
• Highly efficient and suitable absorber for solvent based coatings, allowing for thinner films and more durable coatings
• Excellent compatibly with a variety of organic polymers
• Exhibits unmatched UV absorber range extending into longer wavelength and visible light range
• Provides protection to UV sensitive and blue-light cut characteristics for coatings and polymers

Luna-stab LS-144 is a hindered amine light stabiliser (HALS) that signifiantly coating life by minimising paint defects such as cracking and gloss reduction.