BELSIL^® EG 3000 elastomer gel is a silicone copolymer network blended with Isohexadecane. The product appears as a colorless, translucent gel. As BELSIL^® EG 3000 is based on the organic solvent Isohexadecane, the sensorial sensation during the application and after use differs from classical silicone based elastomer gels. The gel is perceived very pleasant, light and powdery

BELSIL ®EG 7 elastomer gel is a cross-linked high molecular weight silicone swollen in low molecular weight low viscous dimethicone. It transforms to a matte appearance with an excellent silky feel.

BELSIL® ADM 331 is an oil-in-water macroemulsion of an amodimethicone fluid of low amine content, containing a cationic/nonionic surfactant pair. Due to the chemical structure of the aminofunctional active ingredient and the emulsifier system, BELSIL® ADM 331 has excellent affinity as a conditioner for hair care application.

BELSIL® ADM 6060 is an oil-in-water macroemulsion of an amodimethicone fluid , emulsified by a nonionic surfactant system. The aminofunctional units show an excellent affinity and substantivity on hair.

BELSIL® DADM 3050 E is an innovative silicone/vegetable oil composite emulsion, containing nonionic surfactant as emulsifier, which is suitable for hair care products. The combination of high-viscosity dimethicone and amodimethicone fluid is optimized in BELSIL® DADM 3050 E as a highly effective conditioning agent for healthy and damaged hair, meanwhile coconut oil can penetrate in hair and deliver inside-out repairing.

BELSIL® DM 3096 is a blend of low-viscosity dimethicones and a high-molecular dimethiconol. Due to its composition, it combines the properties of the low-viscosity fluids and the extremely high-viscosity dimethiconol. The excellent spreading of the low-viscosity dimethicones allows a good distribution of the high-viscosity conditioning agent dimethiconol.

BELSIL® DM 7890 is in hair care. BELSIL® DM 7890 is excellent condition-ing additives, especially when formulated into rinse-off as well as leave-in conditioners. They improve wet and dry combability as well as the wet and dry feel of the hair. BELSIL® DM 7890 also provides conditioning benefits when used in other formulations such as shampoos and styling aids.

BELSIL® DM 9819 is an anionic/non-ionic emulsion of a high-viscosity dimethiconol (approx. 1000000 to 1800000 mm 2 /s).

BELSIL® DMC 6038 is a wax-like, waterdisperable dimethicone copolyol that exhibits good compatibility with polar ingredients.

BELSIL® DMC 6038 is used in Skin Care and Hair Care formulations as well as in Deodorants because of its good compatibility with other ingredients. Its low melting point improve the distribution of Creams, Lotions, Deodorant Sticks and Roll-on Deodorants.

BELSIL® DMC 6038 enhances the softening and moisturizing properties of the formulation. Besides offering the possibility of formulating clear products, BELSIL® DMC 6038 exerts a profoaming effect in Shower Gels and Shampoos and enhances the softness of skin and hair.

BELSIL® GB 3010 is a blend of isododecane and a high-molecular dimethiconol. The blend has a low viscosity allowing a good distribution of the high-viscosity conditioning agent dimethiconol. BELSIL® GB 3010 is used in skin and hair care. It forms a breathable, water-resistant barrier on the skin, enhancing smoothness and elasticity. In hair care, it adds softness, improves wet/dry combability, and protects damaged hair.

BELSIL® PF 100 is a aryl- and alkyl- modified silicone fluid of medium viscosity. BELSIL® PF 100 is characterized by having a higher refractive index than standard dimethicone fluids (1.38-1.40). It offers significant improvements in regards to gloss and shine.

BELSIL® REG 1103 B hydrophilic resin elastomer gel is a silicone copolymer network blended with a non-volatile, low viscosity dimethicone and a silicone polyglucoside. The silicone polyglucoside contained in this blend is a nonionic surfactant with an HLB of approximately 6 - 7. This allows the gel to take up water and act as a secondary emulsifier. BELSIL® REG 1103 B is a transparent gel, which provides a very pleasant sensory property - both during application and afterwards. BELSIL® REG 1103 B can act as a thickener in formulations while delivering a smooth application. It also exhibits shear-thinning behavior which allows for formulation of cosmetic products that spread easily during application and facilitates the incorporation of pigments into a formulation.

BELSIL® TMS 803 is the co-hydrolysis product of tetraalkoxysilane (Q unit) and trimethylethoxysilane (M unit). The chemical structure of BELSIL® TMS 803 can be seen as a three-dimensional network of polysilic acid units, which are endblocked with trimethylsilyl groups.

In sunscreen, skincare and color cosmetic applications, the Trimethylsiloxysilicate BELSIL® TMS 803 is an excellent water resistant additive and helps to hold pigments in place. It prevents agglomeration and maintains free-flowing characteristics in loose powder products.

In hair care compositions, the silicone resin provides volume and body, while imparting humidity resistance to the hair.

BELSIL® WO 5000 est une solution active d’environ 30 % dans la diméthicone. Le silicone Le polyglucoside contenu dans cette solution est un tensioactif non ionique avec un HLB d’environ 6 à 7.

LIOSIL® FC 218 E est une macro-émulsion non ionique d’un fluide de silicone réactif et aminofonctionnel, spécialement conçue pour les assouplissants.

SILFOAM® SE 39 est une émulsion antimousse à faible viscosité d’une efficacité durable. SILFOAM® SE 39 est particulièrement adapté aux applications dans lesquelles des concentrations élevées de tensioactifs ou un mouvement intensif du produit rendraient les émulsions antimousse conventionnelles rapidement inefficaces.

WACKER® FC 218 est une macro-émulsion non ionique d’un fluide de silicone réactif et aminofonctionnel, spécialement conçue pour les assouplissants.

WACKER® HC 303 est bien adapté à l’hydrophobe de la plupart des matériaux tels que les textiles, cuir, bois, liège, papier, etc. Pour ces applications, WACKER® HC 303 est dilué avec de l’eau jusqu’à une teneur active de 1 à 5 %.