Protege Contra la Corrosión e Inhibe la Formación de Compuestos Taninos con la Gama Halox® de ICL

HALOX® 430 is a non-toxic, heavy metal-free anticorrosive pigment designed for use in water-borne and solvent-borne protective coating systems. HALOX® 430 is based on a unique synergy between an ion scavenging and passivation mechanism. It is recommended for use in long-term applications where the use of heavy metals, such as zinc, strontium, barium, molybdenum, and chromate, is of concern.

HALOX® 515 is a liquid organic corrosion inhibitor for high gloss (direct to metal) coating systems. HALOX® 515 offers the great benefits of providing cost-effective flash rust protections and long-term corrosion protection when used as recommended. Also improved adhesion at the scribe and good humidity resistance. HALOX® 515 is heavy metal free, nitrite-free, and contains no chromates or phosphates. HALOX® 515 can easily and effectively be post added or added in the letdown stage of any coating system.

HALOX® 550 WF is a water-free (WF) sol-gel-based corrosion inhibitor/adhesion promoter for the protection of water-based and solvent-based clear coats, glossy direct-to-metal coatings, thin-film coatings, acrylic emulsions, polyurethanes, epoxies, alkyds, water-reducible alkyds, PVB wash primers, and polyester resins. Suitable for low pH and acid-catalyzed systems.

HALOX® 630 is a liquid organic corrosion inhibitor for solvent based protective coatings on metal surfaces. HALOX® 630 may use in solvent-borne clear or pigmented coatings.

HALOX® 650 is an organic corrosion inhibitor primarily designed for coatings and primers on metal surfaces. HALOX® 650 is specifically designed for use in solvent-borne or powder-coating applications to provide long-term corrosion protection. HALOX® 650 is suitable for the application of coil coatings resins such as thermoplastic acrylics or epoxies, powder coatings systems such as polyester/TGIC, acid-catalyzed thermosetting systems such as melamine or urea-formaldehyde, and wash (etch) primers based on PVB.

HALOX® FLASH-X® 150 is used in the manufacture of water-base protective coatings as an effective liquid additive for inhibition of flash rust and in-can rusting. Testing has shown that HALOX® FLASH-X® 150 is highly effective at relatively low loading levels as compared to other flash and in-can rust inhibitors. HALOX® FLASH-X® 150 has demonstrated excellent flash rust inhibitive performance on various metal substrates ranging from iron, steel, and galvanized iron to galvalume and zincalume. Evaluations have shown HALOX® FLASH-X® 150 to be effective for inhibiting in-can rusting in lined and unlined metal containers. HALOX® FLASH-X® 150 is compatible with a variety of latices without causing film sensitivity or package stability problems that can occur with other flash rust additives. HALOX® FLASH-X® 150 is also an effective additive for stabilizing metal substrates when using the water-blasting method of surface restoration. HALOX® FLASH-X® 150 is easy to use and can be incorporated at any stage of coating manufacture. HALOX® FLASH-X® 150 can also be easily and effectively post added to any coating system; however, as with any additive, compatibility should be checked prior to use.

HALOX® SW-111 is a white, nonrefractive, corrosion inhibiting pigment used in protective coating systems. HALOX® SW-111 is recommended for use in most water-borne and solvent-borne epoxies. HALOX® SW-111 can be formulated into most water reducible resin systems and corrosion resistant caulks and sealants.

HALOX® XTAIN® L-47 is a zinc-free, ammonia-free, volatile organic compound (VOC)-free liquid stain inhibiting additive designed to stop tannin bleed in various waterborne coating systems.