Because of its cationic character and the extremely high polarity of Deuteron LE 100 LV, the electrical resistance is reduced considerably – even when using small quantities.

Deuteron LE 100 LV is delivered with an active content of 100 %. The product is free of solvent and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing a master batch. That is why the product is particularly suitable for solvent free systems.

Deuteron LE 100 LV can be used (among others) in PUR-foams (production of shoe-soles), UV- or electron-beam curing screen inks to avoid electrostatic charge.

Deuteron LE 151 is designed to be used as an antistatic agent for polyurethane compounds based on polyester and polyether. These compounds are used in the shoe industry to produce soles with antistatic properties. Deuteron LE 151 is preferred in systems which already contain MEG as a cross-linking component.

Deuteron LE 151 is of high polarity and therefore reduces the electrical resistance of polyurethane-foams considerably – even when using small quantities.

Because of its cationic character and the extreme polarity of Deuteron LE 80, the electric resistance of organic solvents and their mixtures is considerably reduced – even when using small quantities.

Deuteron LE 80 is soluble in all common lacquer solvent mixtures, sometimes being slightly cloudy.

Deuteron LE 80 can be used in air-drying primers and coatings, baking enamels, 2-compound systems and wood finishes.

Because of its cationic character and the extremely high polarity of Deuteron LE 512, the electrical resistance is reduced considerably – even when using small quantities.

Deuteron LE 512 is a solid product with an active content of 100 %. Therefore the product is especially suitable in solvent free systems. Deuteron LE 512 is soluble in water and alcohol but insoluble in aliphatic hydrocarbons.

The suitability of Deuteron LE 512 in different systems has to be determined by the user. The product is, for example, very effective in PU-systems. However, products of this chemical family are practically ineffective in epoxy systems.