The Spartacryl PM® Series colorants have been designed for broad use in industrial coatings. These products have been formulated to provide an universal colorant system to the coatings formulator for tinting and full pigmentation of most solvent-based industrial coatings. Key Benefits The Spartacryl PM® Series pigment dispersions for solvent-based industrial coatings applications consist of industrial quality organic and inorganic pigments finely milled in an acrylic carrier resin. The acrylic carrier resin along with a proprietary additive package allows for high pigment solids and superior compatibility. These components also allow for a rheological profile suitable for in-plant tinting. Because of the wide compatibility of the dispersing resin, the Spartacryl PM® Series colorants can be used as the only solvent-based colorant line needed to tint a wide range of solvent-based coatings. The color palette is suitable for matching most industrial colors. The cross-compatibility with other colorants in the line will allow for blending of the masstone colors to create color pack that can be used on the job site. Properties The dispersing resin in the Spartacryl PM® Series is a nonfunctional acrylic polymer with a tightly controlled, low molecular weight. The molecular weight of the vehicle helps to ensure full development of pigment strength through its exceptional wetting properties while providing a rheological profile suited for in-plant tinting. PM acetate is used as the solvent because it is not toxic and does not react with cross-linking resins such as isocyanates. Only prime pigments are included in this line’s formulations; no extenders are present. Applications The Spartacryl PM® Series is formulated for use in most solvent-based industrial coatings including, but not limited to, concrete protection, general industrial, industrial maintenance, marine, plastic, and wood coatings. These colorants also perform well in decorative and special effect paints for sporting equipment.

PTFE-free surface additive for increasing surface slip and scratch resistance with an additional positive effect on leveling properties and substrate wetting, and an anti-cratering effect in powder coatings.

Rilsan D30 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 21 - 27 μm. Rilsan D is a range of high performance fine polyamide powders used as multifunctional additives in coatings and varnishes. The introduction of Rilsan polyamide powders in formulations is easy thanks to their good dispersion capacity, their reduced Impact on rheology and their low density. Rilsan polyamide powders are surface modifiers, specifically designed for texture creation. Abrasion, scratch, impact resistances and flexibility of coatings, inks and varnishes can be significantly improved using Rilsan polyamide powders

Rilsan D60 NAT is a polyamide 11 powder obtained from renewable resources with an average diameter of 43 - 55μm. Rilsan D is a range of high performance fine polyamide powders used as multifunctional additives in coatings and varnishes. The introduction of Rilsan polyamide powders in formulations is easy thanks to their good dispersion capacity, their reduced Impact on rheology and their low density. Rilsan polyamide powders are surface modifiers, specifically designed for texture creation. Abrasion, scratch, impact resistances and flexibility of coatings, inks and varnishes can be significantly improved using Rilsan polyamide powders.