MA-223U is a difunctional primary amine. Its mainchain is consisted of repeating oxypropylene units. The average molecular weight of MA-223U is about 230. MA-223U is a clear liquid with amine-like odor. It is ideal for use in epoxy curing agents, adhesives and surfactants.

POLYETHERAMINE MA-2200 is a difunctional primary amine. Its mainchain is consisted of repeating oxypropylene units. The average molecular weight of POLYETHERAMINE MA-2200 is about 2000. POLYETHERAMINE MA-2200 is a clear liquid with amine-like odor. It is ideal for use in epoxy curing agents and polyurea.

HALOX® SZP-391 is a white, nonrefractive, corrosion inhibiting pigment used in protective coating systems. HALOX® SZP-391 is the most efficient and versatile corrosion inhibitive pigment. HALOX® SZP-391 is recommended for use in a wide variety of resin systems. HALOX® SZP-391 is equally effective in such resins as alkyds (both traditional and high solids), epoxies, latexes, water-reducible alkyds, and high acid value resins, catalyzed baking systems, and vinylidene chloride latexes.

HALOX® FLASH-X® 150 is used in the manufacture of water-base protective coatings as an effective liquid additive for inhibition of flash rust and in-can rusting. Testing has shown that HALOX® FLASH-X® 150 is highly effective at relatively low loading levels as compared to other flash and in-can rust inhibitors. HALOX® FLASH-X® 150 has demonstrated excellent flash rust inhibitive performance on various metal substrates ranging from iron, steel, and galvanized iron to galvalume and zincalume. Evaluations have shown HALOX® FLASH-X® 150 to be effective for inhibiting in-can rusting in lined and unlined metal containers. HALOX® FLASH-X® 150 is compatible with a variety of latices without causing film sensitivity or package stability problems that can occur with other flash rust additives. HALOX® FLASH-X® 150 is also an effective additive for stabilizing metal substrates when using the water-blasting method of surface restoration. HALOX® FLASH-X® 150 is easy to use and can be incorporated at any stage of coating manufacture. HALOX® FLASH-X® 150 can also be easily and effectively post added to any coating system; however, as with any additive, compatibility should be checked prior to use.