HALOX® FLASH-X® 330 is an effective, nitrite-free, liquid additive used in the manufacture of waterborne protective coatings for inhibition of flash rust and in-can rusting and has demonstrated excellent flash rust inhibitive performance on a variety of metal substrates without the use of nitrites.

HALOX® 580 is a sustainable, ultra-low VOC (<0.5%), bio-based liquid corrosion inhibitor designed for protection of water-based, solvent-based, high solids, 100% solids paints, direct-to-metal (DTM) coatings. It is suitable for thin-film coatings, 1K acrylic emulsions, 2K epoxies, water reducible alkyds, 2K polyurethanes, alkyds, urethane alkyds, etc. With 50% bio-content, HALOX® 580 provides a cost-effective, environmentally friendly solution for corrosion protection while maintaining formulation flexibility, as it can be post-added or incorporated during the letdown phase.

 

HALOX® 580 is a clean-label inhibitor, free from heavy metals, APEO, and HAPS, making it non-hazardous for shipping and transportation, ultimately reducing costs and regulatory concerns. Engineered for both waterborne and solvent-borne paints, HALOX® 580 enhances adhesion and water resistance, minimizing osmotic blistering while maintaining good shelf stability. Its organophosphate and bio-based solvent carrier provides a synergistic boost to traditional anticorrosive pigments, improving overall coating performance. Non-flammable and with minimal gloss impact, it is an ideal choice for high-solids primers, topcoats, and eco-label-compliant coatings across various resin systems, including acrylic, epoxy, urethane, and alkyds.

HALOX® 515 LFG is a low-freeze grade liquid organic corrosion inhibitor for high gloss (direct to metal) coating systems. HALOX® 515 LFG will provide cost-effective flash rust protections and long-term corrosion protection when used as recommended. HALOX® 515 LFG is also effective for thin film applications. Recommended loading levels range from 1-3% based on total formula weight. HALOX® 515 LFG can easily and effectively be post added or added in the letdown stage of any coating system, however, as with any additive, compatibility should be checked prior to use.

HALOX® 570 LS is a ready-to-use liquid version of our popular organic corrosion inhibitor HALOX® 570 which requires no dilution. HALOX® 570 LS is designed for use in waterborne industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces and is especially effective along weld seams to prevent galvanic corrosion. HALOX® 570 LS may be used in formulations based on waterborne acrylics, epoxy esters, 2 component epoxy, waterreducible alkyds, and water-based polyurethanes. HALOX® 570 LS may be used in both waterborne primers and direct-to-metal topcoats. In direct-to-metal coatings HALOX® 570 LS has minimal effect on gloss reduction. Recommended loading levels range from 1-3% based on total formula weight.