Deuteron LE 292 is an anti-static additive based on a novel esterquat. It is available as a 90% solution in Isopropanol. In contrast to anti-static additives based on TAA salts. Deuteron LE 292 has a significantly lower toxicity and it’s active content is 100% biodegradable (according to OECD). The content of renewable raw materials is approx. 70%.

Compared to TAAS-based conductivity promoters, Deuteron LE 292 is not water soluble – this can prove advantageous in the case of wash-out effects.

Deuteron LE 292 can be used in polyurethane foams, casting resins, floor coatings or printing inks to impart anti-static effects.

Deuteron LE 200 is an anti-static additive based on a novel esterquat. It is available as a 100% material in the form of a free-flowing gel. In contrast to anti-static additives based on TAA salts. Deuteron LE 200 has a significantly lower toxicity and is 100% biodegradable (according to OECD). The content of renewable raw materials is approx. 70%.

Compared to TAAS-based conductivity promoters. Deuteron LE 200 is not water soluble – this can prove advantageous in the case of wash-out effects.

Deuteron LE 200 can be used in polyurethane foams, casting resins, floor coatings or printing inks to impart anti-static effects.

Because of its cationic character and the extremely high polarity of Deuteron LE 100 LV, the electrical resistance is reduced considerably – even when using small quantities.

Deuteron LE 100 LV is delivered with an active content of 100 %. The product is free of solvent and of low viscosity. It is characterized by ease of handling. Deuteron LE 100 LV can be processed at room temperature and below without melting or producing a master batch. That is why the product is particularly suitable for solvent free systems.

Deuteron LE 100 LV can be used (among others) in PUR-foams (production of shoe-soles), UV- or electron-beam curing screen inks to avoid electrostatic charge.

Deuteron LE 151 is designed to be used as an antistatic agent for polyurethane compounds based on polyester and polyether. These compounds are used in the shoe industry to produce soles with antistatic properties. Deuteron LE 151 is preferred in systems which already contain MEG as a cross-linking component.

Deuteron LE 151 is of high polarity and therefore reduces the electrical resistance of polyurethane-foams considerably – even when using small quantities.