DEUTERON SF 707 is Duroplastic additive for haptic surface modification. Deuteron SF 707 increases the smoothness and adds a pleasant grip to the surface. It includes neither waxes nor silicones. The matting effect is smooth, so that the haptic can be adjusted, without heavily influencing the gloss level. The unique synthesis of Deuteron SF surface additives leads to compact particle structures with high hardness and low COF (coefficient of friction) – this property makes them excellent alternatives to traditional PTFE based additives. Because of their highly compatible chemistry they can be used in a wide variety of different applications and systems

Deuteron LE 50 UV is a variant of Deuteron LE 100 LV, diluted in 50 % DPGDA. Even in small amounts it considerably reduces the surface and volume resistances. Deuteron LE 50 UV is soluble in all conventional solvent mixtures used in the coating industry, partially with some slight clouding.

DEUTERON SF 505 is Duroplastic additive for haptic surface modification. Deuteron SF 505 increases the smoothness and adds a pleasant grip to the surface. It includes neither waxes nor silicones. The matting effect is smooth, so that the haptic can be adjusted, without heavily influencing the gloss level. The unique synthesis of Deuteron SF surface additives leads to compact particle structures with high hardness and low COF (coefficient of friction) – this property makes them excellent alternatives to traditional PTFE based additives. Because of their highly compatible chemistry they can be used in a wide variety of different applications and systems

Deuteron MM 100 and MM 110 are preparations of very fine PMU (Polymethyl urea) particles dispersed in DPGDA (dipropylene glycol diacrylate). The products are developed as matting agents especially for thin layer UV curable coatings and inks.
for thin layer UV curable coatings and inks.

 

Depending on the addition level Deuteron MM 100 and MM 110 can be used as matting agents with comparatively high mechanical resistance for high quality applications.

 

Deuteron MM 100 has an active content of 17% and contains no additives. Deuteron MM 110 has 25% active content, contains a wetting agent and has a very low viscosity.