CRAYVALLAC® PC is a micronised hydrogenated castor oil derivative surface enhancing additive for powder coatings based on PRIMID, hybrid and TGIC technologies. CRAYVALLAC® PC is easily incorporated using conventional pre-mixing techniques prior to extrusion. The use of CRAYVALLAC® PC leads to a substantial improvement in the appearance of the final cured powder coating. This improvement is due to CRAYVALLAC® PC enhancing the flow, levelling and degassing processes during cure. This is the result of CRAYVALLAC® PC greatly reducing the melt viscosity during this critical levelling stage in the cure cycle. This viscosity reduction also enhances the performance of other additives such as acrylic levelling agents and the degassing agent benzoin. CRAYVALLAC® PC works well in both clear and pigmented powder coating systems based on PRIMID, Hybrid and TGIC technologies.

ORGASOL® 2002 ES6 NAT 3 is a spheroïdal powder of polyamide 12, with 60 µm as average diameter and a narrow particle size distribution. An extremely high level of quality is achieved thanks to our rigorous control of particle size distribution, providing excellent consistency in performance. ORGASOL® 2002 ES6 NAT 3 is used as a multifunctional additive in coatings. It improves the scratch and the abrasion resistance while providing a regular textured finish thanks to the spheroïdal shape of the particles. Playing on coatings texture, ORGASOL® 2002 ES6 NAT 3 can lead to anti-slippery properties associated to a better clean ability. The high chemical resistance of polyamide 12 and the particle size distribution are among the key parameters that make ORGASOL® 2002 ES6 NAT 3 compatible with most resins and common formulating additives used in coating industry. It can be added to interior or exterior paints and easily dispersed in solvent or water based or 100% solid UV curable system.

RILSAN® T BLEU 7443 MAC is a special polyamide powder obtained from renewable resources to use in the process of coating and fluidized ded dipping. RILSAN® T BLEU 744 displays a superior protection against wear, impact, corrosion, chemical as well as graffiti. RILSAN® T BLEU 7443 is suitable to use in metal coating, outdoor furniture, fluids transport and general purpose. For further details, please see the specification sheet below and contact our local sales representative today!

RILSAN® T BLUE 7443 MAC appears in a fine powder form obtained from renewable resources specially for polyamide, it is normally use in coating, fludised bed dipping process. RILSAN® T BLUE 7443 MAC provides a superior protection against wear, impact, corrosion, chemicals aswell as graffiti. RILSAN® T BLUE 7443 MAC is recommended to use in metal coating, outdoor furniture, fluid transport and as well as general purpose coating. Please see the specification sheet below and for further details contact our local sales representative today.