EPOTEC® TH 7525 is a medium viscosity reactive polyamide used as a curing agent for liquid or solution grade epoxy resins such as EPOTEC® YD 128 or EPOTEC® YD 011X-75 to produce room temperature curable thermoset coatings. Epotec TH 7525 is specially used in solvent based anti-corrosion coatings and shows compatibility with wide range of solvents normally used in epoxy based coatings. The reactivity of the product can be adjusted by blending with tertiary amine and the viscosity by other reactive polyamides. The coatings based on EPOTEC® TH 7525 shows good toughness and adhesion properties. Because of these properties, it finds use in various applications.

EPOTEC® TH 7515 is a high viscosity reactive polyamide used as a curing agent for liquid or solution grade epoxy resins such as EPOTEC® YD 128 or EPOTEC® YD 011-X-75 to produce room temperature curable thermoset adhesives and coatings. EPOTEC® TH 7515 is especially used in solvent based anti-corrosion coatings and shows compatibility with a wide range of solvents normally used in epoxy based coatings. The reactivity of the mix can be adjusted by blending with accelerators such as tertiary amine. The coatings based on EPOTEC® TH 7515 shows good toughness and adhesion properties. Because of these properties, it finds use in various applications.

EPOTEC® TH 7334 is a low viscosity, low colour modified cycloaliphatic polyamine curing agent for use with liquid epoxy resins such as EPOTEC® YD 128 to produce solvent free room temperature curable thermoset coatings, floor toppings. When formulated appropriately with epoxy resin it gives clear, air free, glossy surfaces. It has high blush resistance under high humidity condition. It also provides resistance to variety of chemicals such as acids, alkalies, hydrocarbons and water.

Recyclamine® R802 is an amine curing agent which enables recyclable thermosetting epoxy. It possesses low viscosity, cures at ambient temperature and exhibits moderate reactivity with di-epoxide resins. Unlike conventional thermoplastics, cross-linked thermosetting matrix from Recyclamine® R802 undergoes cleavage by low energy solvolysis at specific conditions, resulting in recovering of the epoxy matrix as thermoplastic resin. In fiber reinforced composites, Recyclamine® R802 enables recycling & recovery of reinforcement and epoxy matrix as thermoplastic resin. The recovered materials can be re-used to close the loop.