Epotec YD 901H is a low molecular weight solid epoxy resin which can be used in powder coatings as well as solvent based industrial coatings. Epotec YD 901H has molecular weight & viscosity in between epotec YD 901 & epotec YD 902.
Epotec YD 901H has lower Tg & hence is prone to sinter upon storage.

Applications

• Solvent based industrial coatings
• Powder coatings

Epotec YD 0112 is a medium molecular weight standard solid epoxy resin. It has good electrostatic spraying performance, chemical resistance and anti-corrosive properties. It can be used in epoxy polyester powder coatings, or mixing with an amine curing agent for use in anti-corrosion and insulation coatings.

Applications

• Powder coatings
• Solvent based two components coatings
• Anticorrosive coatings

Epotec YD 126 is an unmodified liquid epoxy resin produced from bisphenol-A and epichlorohydrin processed to produce lower viscosity than standard liquid epoxy resin without any modification by diluent .The lower viscosity of this product enables the formulator to develop solvent free and high solids coatings without or with minimal use of diluents. A wide variety of curing agents are available to cure this liquid epoxy resin at ambient conditions and also at elevated temperature. Overall good strength, adhesion & very low shrinkage makes this product suitable for use in varied applications including protective coatings, structural strengthening systems, electrical component encapsulation & insulation etc.

Epotec TH 7302 is a low viscosity modified cycloaliphatic polyamine curing agent for use with liquid epoxy resins such as epotec YD 128 to produce solvent free room temperature curable thermoset coatings, floor toppings. When formulated appropriately with epoxy resin it gives clear, hard surface resistant to variety of chemicals such as acids, alkalies, hydrocarbons, water etc. Epotec TH 7302, being cycloaliphatic, also provides better weather resistance than aliphatic polyamines.