HALOX® 520 is a liquid organic corrosion inhibitor primarily designed for use in water-borne and solvent-borne coatings systems. It contains dual functionality as a corrosion inhibitor and an adhesion promoter. HALOX® 520 may be used in waterborne formulations such as 2 pack epoxy systems, 1 and 2 pack polyurethanes, acrylics (especially epoxy/amine-functionalized), and hybrid systems and may also be used as a metal pretreatment additive. Recommended concentrations range from 0.5-1.5% based on total formulation solids. The amount of HALOX® 520 required for optimum performance should be determined in trials over the recommended concentration range.

HALOX® 580 is a sustainable, ultra-low VOC (<0.5%), bio-based liquid corrosion inhibitor designed for protection of water-based, solvent-based, high solids, 100% solids paints, direct-to-metal (DTM) coatings. It is suitable for thin-film coatings, 1K acrylic emulsions, 2K epoxies, water reducible alkyds, 2K polyurethanes, alkyds, urethane alkyds, etc. With 50% bio-content, HALOX® 580 provides a cost-effective, environmentally friendly solution for corrosion protection while maintaining formulation flexibility, as it can be post-added or incorporated during the letdown phase.

 

HALOX® 580 is a clean-label inhibitor, free from heavy metals, APEO, and HAPS, making it non-hazardous for shipping and transportation, ultimately reducing costs and regulatory concerns. Engineered for both waterborne and solvent-borne paints, HALOX® 580 enhances adhesion and water resistance, minimizing osmotic blistering while maintaining good shelf stability. Its organophosphate and bio-based solvent carrier provides a synergistic boost to traditional anticorrosive pigments, improving overall coating performance. Non-flammable and with minimal gloss impact, it is an ideal choice for high-solids primers, topcoats, and eco-label-compliant coatings across various resin systems, including acrylic, epoxy, urethane, and alkyds.

HALOX® 630 is a liquid organic corrosion inhibitor for solvent based protective coatings on metal surfaces. HALOX® 630 may use in solvent-borne clear or pigmented coatings.

HALOX® XTAIN® L-44 is a very effective liquid tannin stain-blocking additive that provides high performance and good compatibility in most water based coating systems. Excellent tannin stain blocking properties can be achieved with HALOX® XTAIN® L-44 without the need for zinc oxide which is required to achieve performance by most tannin blocking polymers on the market today. Since HALOX® XTAIN® L-44 eliminates the need for zinc oxide without sacrificing performance, improved package stability and shelf life of the coating system will usually result.