STEPANPOL PC-1028P-210 is a solvent free saturated polyester resin.

The Spartacryl PM® Series colorants have been designed for broad use in industrial coatings. These products have been formulated to provide an universal colorant system to the coatings formulator for tinting and full pigmentation of most solvent-based industrial coatings. Key Benefits The Spartacryl PM® Series pigment dispersions for solvent-based industrial coatings applications consist of industrial quality organic and inorganic pigments finely milled in an acrylic carrier resin. The acrylic carrier resin along with a proprietary additive package allows for high pigment solids and superior compatibility. These components also allow for a rheological profile suitable for in-plant tinting. Because of the wide compatibility of the dispersing resin, the Spartacryl PM® Series colorants can be used as the only solvent-based colorant line needed to tint a wide range of solvent-based coatings. The color palette is suitable for matching most industrial colors. The cross-compatibility with other colorants in the line will allow for blending of the masstone colors to create color pack that can be used on the job site. Properties The dispersing resin in the Spartacryl PM® Series is a nonfunctional acrylic polymer with a tightly controlled, low molecular weight. The molecular weight of the vehicle helps to ensure full development of pigment strength through its exceptional wetting properties while providing a rheological profile suited for in-plant tinting. PM acetate is used as the solvent because it is not toxic and does not react with cross-linking resins such as isocyanates. Only prime pigments are included in this line’s formulations; no extenders are present. Applications The Spartacryl PM® Series is formulated for use in most solvent-based industrial coatings including, but not limited to, concrete protection, general industrial, industrial maintenance, marine, plastic, and wood coatings. These colorants also perform well in decorative and special effect paints for sporting equipment.

EBECRYL LEO 10801 is a hexafunctional polyester acrylate oligomer that provides high reactivity and the proper ink-water balance necessary for good lithographic printing. Lithographic inks based on EBECRYL LEO 10801 display excellent rheological properties ensuring good ink transfer from the printing plate to the blanket and then to the substrate, combined with good dot definition. EBECRYL LEO 10801 has been specifically developed to formulate UV/EB curable inks with low extractables and low odor for indirect food contact applications

VYLON 601 is a pale-yellow solid flake co-polyester produced by TOYOBO CHEMICALS (THAILAND) CO., LTD. It has a density of 1.25 g/cm³ at 30°C and a softening point of 155°C. The product is combustible and soluble in solvents like ethyl acetate and THF. It is mainly used for adhesion bonding and painting materials, offering stability under normal conditions and good solvent compatibility.