The Spartacryl PM® Series colorants have been designed for broad use in industrial coatings. These products have been formulated to provide an universal colorant system to the coatings formulator for tinting and full pigmentation of most solvent-based industrial coatings. Key Benefits The Spartacryl PM® Series pigment dispersions for solvent-based industrial coatings applications consist of industrial quality organic and inorganic pigments finely milled in an acrylic carrier resin. The acrylic carrier resin along with a proprietary additive package allows for high pigment solids and superior compatibility. These components also allow for a rheological profile suitable for in-plant tinting. Because of the wide compatibility of the dispersing resin, the Spartacryl PM® Series colorants can be used as the only solvent-based colorant line needed to tint a wide range of solvent-based coatings. The color palette is suitable for matching most industrial colors. The cross-compatibility with other colorants in the line will allow for blending of the masstone colors to create color pack that can be used on the job site. Properties The dispersing resin in the Spartacryl PM® Series is a nonfunctional acrylic polymer with a tightly controlled, low molecular weight. The molecular weight of the vehicle helps to ensure full development of pigment strength through its exceptional wetting properties while providing a rheological profile suited for in-plant tinting. PM acetate is used as the solvent because it is not toxic and does not react with cross-linking resins such as isocyanates. Only prime pigments are included in this line’s formulations; no extenders are present. Applications The Spartacryl PM® Series is formulated for use in most solvent-based industrial coatings including, but not limited to, concrete protection, general industrial, industrial maintenance, marine, plastic, and wood coatings. These colorants also perform well in decorative and special effect paints for sporting equipment.

VYLON SS-3300 is a co-polyester/amorphous resin primarily designed for can coating applications, both interior and exterior. It boasts excellent retort resistance and food acid resistance, along with good solubility and compatibility with other polyester materials. Additionally, it exhibits strong adhesion to aluminum and tin plate surfaces. Its constituent monomers conform to FDA§175.300 and EU No.10/2011 regulations, although some catalyst components are not listed in the positive lists of these regulations.

SETAL® 26-1089 is a saturated polyester resin intended for use in general and high-end industrial metal finishing. This resin offers excellent cure qualities of hardness, toughness, chemical resistance, gloss retention, chalking resistance, and durability. SETAL 26-1089 has good compatibility with aliphatic solvents and limited compatibility with aromatic solvents.

STEPANPOL® PD-320 can be used in formulating urethane coatings, adhesives, sealants, and elastomers. This product can exhibit good hydrolysis resistance, very good thermal stability and primary hydroxyl advantage. It may promote adhesion to a variety of metal and plastic substrates. This product has low viscosity for ease of blending and high aromatic content.