S-06E is an electronic grade epoxy. It can be used as a casting resin, in LED encapsulation, insulating materials, 3D printing, carbon fibre cable cores and other composite materials, giving outstanding performance for UV resistance and anti-radiation properties. It is UV curable, thermal curable with anhydrides, high TG up to 195ºC, excellent yellowing resistance and good UV resistance, outstanding electrical insulation, low halogen and high purity and low viscosity.

DOWSIL™  Z-6121 SILANE is a silane adhesion promoter made from 62% active and 34% solids in alcohol. DOWSIL™  Z-6121 SILANE display the benefits of eliminating the oven cure normally required to develop optimum properties, improves adhesion and salt-spray resistance of epoxy coatings and to improves adhesion of Alkyd finishes to glass. DOWSIL™  Z-6121 SILANE is suitable to use in epoxy coating, silicone resin based coatings and alkyd coatings.

XIAMETER™ OFS-6020 Silane is made from Diaminofunctional silane, and functions as a coupling agent.

XIAMETER™ OFS-6020 Silane possesses both organic and inorganic reactivity. XIAMETER™ OFS-6020 Silane can react with organic polymers and glass or other inorganic mineral surfaces.

XIAMETER™ OFS-6020 Silane offers the benefits to improve adhesion and increase wet and dry tensile strength, flexural strength & compressive strength and Improved compatibility between inorganic filler and organic polymer.

XIAMETER™ OFS-6020 Silane is recommended to use in clay-reinforced elastomers such as natural and nitrile rubber, mineral-reinforced nylon 6, nylon 6/6 and polybutylene terephthalate, fibreglass finish or as resinous additive and thermoset resins.

Please see the specification sheet below and for further details contact our local sales representative today.