HALOX® CW-291 is white, nonrefractive, corrosion inhibiting pigments used in protective coating systems. They are not recommended for use in immersion or semi-immersion environments. HALOX® CW-291 has the lowest oil absorption of our borosilicate products and is recommended for use in protective coating systems based on alkyd technology. Because of its low oil absorption, HALOX® CW-291 is specifically suggested for use in high solids, medium gloss topcoats, DTM (direct-to-metal) finishes and self priming systems. HALOX® CW-291 is compliant to ASTM D 4288-83, Specification for Calcium Borosilicate Pigment Type 1, Class B. HALOX® CW-291 recommended loading levels range from 5-10% based on total formula weight in primer systems and 2-5% based on total formula weight in topcoat and DTM finishes. PVC levels should range from 40-45% in primers and 15-25% in topcoats and DTM’s.

ADIPIC ACID DIHYDRAZIDE (ADH) is a chemical used for cross-linking water-based emulsions.

HALOX® 630 is a liquid organic corrosion inhibitor for solvent based protective coatings on metal surfaces. HALOX® 630 may use in solvent-borne clear or pigmented coatings.

HALOX® XTAIN® L-44 is a very effective liquid tannin stain-blocking additive that provides high performance and good compatibility in most water based coating systems. Excellent tannin stain blocking properties can be achieved with HALOX® XTAIN® L-44 without the need for zinc oxide which is required to achieve performance by most tannin blocking polymers on the market today. Since HALOX® XTAIN® L-44 eliminates the need for zinc oxide without sacrificing performance, improved package stability and shelf life of the coating system will usually result.