HALOX® 350 is a more active 97-100% solids organic corrosion inhibitor designed to stop flash rust, and in-can corrosion, and provide temporary corrosion protection. HALOX® 350 is an effective replacement for toxic nitrite-based flash rust inhibitors.

HALOX® 650 is an organic corrosion inhibitor primarily designed for coatings and primers on metal surfaces. HALOX® 650 is specifically designed for use in solvent-borne or powder-coating applications to provide long-term corrosion protection. HALOX® 650 is suitable for the application of coil coatings resins such as thermoplastic acrylics or epoxies, powder coatings systems such as polyester/TGIC, acid-catalyzed thermosetting systems such as melamine or urea-formaldehyde, and wash (etch) primers based on PVB.

HALOX® SZP-395 is a white, nonrefractive, corrosion inhibiting pigment used in protective coating systems. HALOX® SZP-395 is our most efficient and versatile corrosion inhibitive pigment. It is recommended for use in a wide variety of resin systems and is equally effective in such resins as: alkyds (both traditional and high solids), epoxies, latexes, water reducible alkyds, high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. The fine particle size and low oil absorption of HALOX® SZP-395 makes it the pigment of choice in thin film applications. Application: Recommended loading levels range from 2-5% based on total formula weight in many waterborne systems. and recommended loading levels range from 3-7% based on total formula weight in traditional solventborne coatings.

HALOX® Z-PLEX® 250 is a white, non-refractive, corrosion inhibiting pigment used in various protective coatings. It is classified as Zn3(PO4)2.2H2O (dihydrate). HALOX® Z-PLEX® 250 is compliant with ASTM D6280, Specification for Zinc Phosphate Pigment Type I. Recommended loading levels range from 5-10% based on total formula weight.