Luna-nox 1076-J is a hindered phenol antioxidant, widely used in polymers including polypropylene, polyethylene, polystyrene, polyamide, ABS, and synthetic rubbers. It is also an effective antioxidant in oils and paints.

Luna-nox 1076-J is odourless, tasteless, low toxicity (LD50≥10000mg/kg) and light-stable, and is recommended for use at 0.1 – 0.3% dosage rate.

Luna-flex MP25-H is a chlorinated binder that is used for the manufacture of physically drying coatings on iron and steel, non-ferrous metals, mineral substrates as well as road marking paints resistant to hydrolysis. It is a resin based on vinyl chloride and vinyl isobutyl ether copolymer. Luna-flex MP25-H is resistant to hydrolysis, corrosion, and is compatible with a wide range of resins, and can therefore be used to formulate for anti-corrosion coatings, concrete coatings, road marking paints, flame-retardant coatings and marine and container paints.

Luna-flex MP60-H is a chlorinated binder that is used for the manufacture of physically drying coatings on iron and steel, non-ferrous metals, mineral substrates as well as road marking paints resistant to hydrolysis. It is a resin based on vinyl chloride and vinyl isobutyl ether copolymer. Luna-flex MP60-H is resistant to hydrolysis, corrosion, and is compatible with a wide range of resins, and can therefore be used to formulate for anti-corrosion coatings, concrete coatings, road marking paints, flame-retardant coatings and marine and container paints.

Epotec YD 128 is an unmodified liquid epoxy resin with medium viscosity produced from bisphenol-A and epichlorohydrin. This is a standard liquid epoxy resin and a wide variety of curing agents are available to cure this liquid epoxy resin at ambient conditions and also at elevated temperature. When cured with appropriate hardener, epotec YD 128 gives excellent mechanical, chemical, electrical and adhesion properties. Because of these properties it finds use in various applications.

Applications

• Solvent based, high solids and solvent free coatings
• Adhesives
• Civil engineering and construction industry
• Automotive coatings
• Can & coil coatings
• Marine and Industrial protective coatings
• Tooling, potting, casting and moulding compounds
• Composites
• Stabilizer in PVC