HALOX® FLASH-X® 150 is used in the manufacture of water-base protective coatings as an effective liquid additive for inhibition of flash rust and in-can rusting. Testing has shown that HALOX® FLASH-X® 150 is highly effective at relatively low loading levels as compared to other flash and in-can rust inhibitors. HALOX® FLASH-X® 150 has demonstrated excellent flash rust inhibitive performance on various metal substrates ranging from iron, steel, and galvanized iron to galvalume and zincalume. Evaluations have shown HALOX® FLASH-X® 150 to be effective for inhibiting in-can rusting in lined and unlined metal containers. HALOX® FLASH-X® 150 is compatible with a variety of latices without causing film sensitivity or package stability problems that can occur with other flash rust additives. HALOX® FLASH-X® 150 is also an effective additive for stabilizing metal substrates when using the water-blasting method of surface restoration. HALOX® FLASH-X® 150 is easy to use and can be incorporated at any stage of coating manufacture. HALOX® FLASH-X® 150 can also be easily and effectively post added to any coating system; however, as with any additive, compatibility should be checked prior to use.

HALOX® CW-2230 is white, nonrefractive, corrosion inhibiting pigments used in protective coating systems. They are not recommended for use in immersion or semi-immersion environments. HALOX® CW-2230 has the highest borate content and can be effectively formulated into such resins as medium and long-oil alkyds, epoxy-esters and modified alkyd systems. HALOX® CW-2230 is compliant to ASTM D 4288-83, Specification for Calcium Borosilicate Pigment Type 2. HALOX® CW-2230 recommended loading levels range from 9-15% based on total formula weight with PVC levels ranging from 42-47%.

HALOX® SW-111 is a white, nonrefractive, corrosion inhibiting pigment used in protective coating systems. HALOX® SW-111 is recommended for use in most water-borne and solvent-borne epoxies. HALOX® SW-111 can be formulated into most water reducible resin systems and corrosion resistant caulks and sealants.

ITAMID M20P is a solid polyamide resin excellent thermal stability which are mainly used in adhesives fusion (Hot Melts).