Luna ACMO is a reactive diluent monomer for UV and EB curable inks and coatings.

HALOX® 680 is an organic ion exchange inhibitor designed as a smart corrosion inhibitor that is released on demand to enhance coating performance. It is a cost-competitive, zero-VOC, fine-milled powder that acts as a synergist with other anticorrosive pigments such as Zinc Phosphate, Z-PLEX 111, SZP-391, and HALOX® 430. By integrating into the organic matrix, HALOX® 680 improves coating adhesion and reduces cathodic delamination (undercutting at the scribe). Additionally, it can be post-added to most solvent-based paints for formulation flexibility.

Compatible with solvent-borne, high solids, and powder coatings, HALOX® 680 is also suitable for water-borne coatings with proper pH adjustment due to its acidic nature. It enables reduced Zinc Phosphate loadings in anticorrosive primers while maintaining effectiveness. With non-flammable properties, it is ideal for solvent-borne primers, DTM alkyds, epoxies, urethanes, high solids and 100% solids epoxies, powder coatings, and coil coatings. It can also be formulated into semi-gloss paints, water-borne epoxies, and acrylics.

Luna-cure 100 is an α-hydroxyalkylphenone photopolymerization initiator.
As a low-viscosity liquid initiator, it is soluble in many organic solvents and has excellent handling, compatibility, and reactivity. Therefore, it is also suitable for mixing with other photopolymerization initiators such as Luna-cure 900. Although the amount varies depending on the film thickness and light irradiation, it is generally effective with an addition amount of 0.5% to 5%.

Luna-cure DETX is a photoinitiator, used in UV curing lithographic and flexographic ink, as well as in electronics, composites and wood coatings.