HALOX® 350 is a more active 97-100% solids organic corrosion inhibitor designed to stop flash rust, and in-can corrosion, and provide temporary corrosion protection. HALOX® 350 is an effective replacement for toxic nitrite-based flash rust inhibitors.

HALOX® 650 is an organic corrosion inhibitor primarily designed for coatings and primers on metal surfaces. HALOX® 650 is specifically designed for use in solvent-borne or powder-coating applications to provide long-term corrosion protection. HALOX® 650 is suitable for the application of coil coatings resins such as thermoplastic acrylics or epoxies, powder coatings systems such as polyester/TGIC, acid-catalyzed thermosetting systems such as melamine or urea-formaldehyde, and wash (etch) primers based on PVB.

HALOX® BW-111 are white, nonrefractive, corrosion inhibiting pigments used in protective coating systems. HALOX® BW-111 is recommended for use in solventborne epoxy systems, both conventional and high solids. HALOX® BW-111 recommended loading levels range from 5-10% base on total formula weight for conventional systems and 10-20% based on total formula weight in higher solids systems.

HALOX® Z-PLEX® 250 is a white, non-refractive, corrosion inhibiting pigment used in various protective coatings. It is classified as Zn3(PO4)2.2H2O (dihydrate). HALOX® Z-PLEX® 250 is compliant with ASTM D6280, Specification for Zinc Phosphate Pigment Type I. Recommended loading levels range from 5-10% based on total formula weight.