TR-TPO-L is an efficient UV photoinitiator with high initiation activity, excellent solubility and photobleaching performance, and is suitable for systems with high requirements for chroma reduction. TR-TPO-L can be used in formulation systems with low yellowing and low odor. TR-TPO-L is widely used in UV coatings, inks and adhesives.

WANNATE® HT-300 can be used as the hardener component for lightfast two-component polyurethane coatings with high resistance to chemicals and weathering, very good gloss retention and outstanding mechanical properties. Preferred co-reactants are polyacrylates or polyester polyols. It is a solvent free aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI).

HARDLEN CY-2329 is an adhesion promoter for polyolefins, which is improved the compatibility with other resins and the stability under low temperature. Therefore, the mixed solution does not increase the viscosity, and does not show gelation. The characteristics of HARDLEN CY-2329 are good adhesiveness to PP/EPDM and TPO without treatment, good compatibility to other resins, and good stability under low temperature (-5 degree C).

HALOX® 570 LS is a ready-to-use liquid version of our popular organic corrosion inhibitor HALOX® 570 which requires no dilution. HALOX® 570 LS is designed for use in waterborne industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces and is especially effective along weld seams to prevent galvanic corrosion. HALOX® 570 LS may be used in formulations based on waterborne acrylics, epoxy esters, 2 component epoxy, waterreducible alkyds, and water-based polyurethanes. HALOX® 570 LS may be used in both waterborne primers and direct-to-metal topcoats. In direct-to-metal coatings HALOX® 570 LS has minimal effect on gloss reduction. Recommended loading levels range from 1-3% based on total formula weight.