HALOX® Z-PLEX® 250 is a white, non-refractive, corrosion inhibiting pigment used in various protective coatings. It is classified as Zn3(PO4)2.2H2O (dihydrate). HALOX® Z-PLEX® 250 is compliant with ASTM D6280, Specification for Zinc Phosphate Pigment Type I. Recommended loading levels range from 5-10% based on total formula weight.

HALOX® 515 LFG is a low-freeze grade liquid organic corrosion inhibitor for high gloss (direct to metal) coating systems. HALOX® 515 LFG will provide cost-effective flash rust protections and long-term corrosion protection when used as recommended. HALOX® 515 LFG is also effective for thin film applications. Recommended loading levels range from 1-3% based on total formula weight. HALOX® 515 LFG can easily and effectively be post added or added in the letdown stage of any coating system, however, as with any additive, compatibility should be checked prior to use.

HALOX® 570 LS is a ready-to-use liquid version of our popular organic corrosion inhibitor HALOX® 570 which requires no dilution. HALOX® 570 LS is designed for use in waterborne industrial and decorative coatings to provide flash rust and long-term corrosion protection on metal surfaces and is especially effective along weld seams to prevent galvanic corrosion. HALOX® 570 LS may be used in formulations based on waterborne acrylics, epoxy esters, 2 component epoxy, waterreducible alkyds, and water-based polyurethanes. HALOX® 570 LS may be used in both waterborne primers and direct-to-metal topcoats. In direct-to-metal coatings HALOX® 570 LS has minimal effect on gloss reduction. Recommended loading levels range from 1-3% based on total formula weight.

HALOX® ZINC PHOSPHATE is a white, nonrefractive, corrosion inhibiting pigment used in protective coating systems. It is generically identified as zinc phosphate-dihydrate. HALOX® ZINC PHOSPHATE exhibits a narrow particle size distribution: upper particle size limit of 10 microns, mean particle size 5 microns. This pigment has a high degree of versatility. It is a standard corrosion inhibitor for most high-performance resin systems such as types of vinyl, chlorinated rubbers, and epoxies. It is recommended for high acid value resins, catalyzed baking systems, and vinylidene chloride latexes. HALOX® ZINC PHOSPHATE is also recommended for thin film applications (1 mil or 25 microns). HALOX® ZINC PHOSPHATE is compliant to ASTM D 6280-98 Specification for Zinc Phosphate Pigment Type I. Recommended loading levels range from 5-15% based on total formula weight.