KUMANOX 3111F (MSP-3F) is designed for solvent-free and high solid coatings as non-reactive diluent, such as protective coatings, construction epoxy paints, marine coatings, epoxy floorings and etc. KUMANOX 3111F (MSP-3F) provides enhanced performances in water and moisture resistance, UV-resistance, adhesion, drying time, flexibility, abrasion resistance, hardness, self-leveling. Especially, KUMANOX 3111F (MSP-3F) provides long-lasting color stability against UV and heat by radical blocking technology as well. KUMANOX 3111F (MSP-3F) must be used for curing agent part only for preventing storage problem. KUMANOX 3111F (MSP-3F) is high purity grade of KUMANOX 3111 (MSP-3).

Luna-vin SP is a medium molecular weight suspension resin, which provides clarity and toughness to rigid films, or solution coatings. Luna-vin SP also provides durability and chemical and stain resistance. Luna-vin SP can be used in adhesives, heat-sealable packaging, marine and protective coatings, magnetic cards and printing inks.

Q-Cel® Lightweight series products have a density approximately one-fifth of most thermoset resins. On an equal weight basis, the Q-Cel® hollow spheres occupy about five times more volume than an equivalent weight of resin, which can reduce compound weight and cost. They can replace heavy fillers, such as calcium carbonate, talc and clays, thus lowering the weight of composite materials. Spheres have the lowest surface area of any filler type, thus the lowest resin demand. Lower viscosities are common, allowing less resin to be used, usually resulting in cost savings in many applications. Q-Cel® 6014® is recommended for castings applications with polyesters, urethanes, PVC plastisol, and other systems where low viscosity and low shear processing conditions are used.

VYLON 601 is a pale-yellow solid flake co-polyester produced by TOYOBO CHEMICALS (THAILAND) CO., LTD. It has a density of 1.25 g/cm³ at 30°C and a softening point of 155°C. The product is combustible and soluble in solvents like ethyl acetate and THF. It is mainly used for adhesion bonding and painting materials, offering stability under normal conditions and good solvent compatibility.