ORGASOL® 3502 D NAT 1, from Arkema, is spheroidal copolyamide 6/12 powder with a narrow particle size distribution and an average diameter of 20µm. ORGASOL® 3502 D NAT 1 has a melting temperature of 142°C. An extremely high level of quality is achieved through rigorous control of the particle size distribution & porosity, ensuring excellent consistency of performance.

Q-Cel® Lightweight series products have a density approximately one-fifth of most thermoset resins. On an equal weight basis, the Q-Cel® hollow spheres occupy about five times more volume than an equivalent weight of resin, which can reduce compound weight and cost. They can replace heavy fillers, such as calcium carbonate, talc and clays, thus lowering the weight of composite materials. Spheres have the lowest surface area of any filler type, thus the lowest resin demand. Lower viscosities are common, allowing less resin to be used, usually resulting in cost savings in many applications. Q-Cel® 6014® is recommended for castings applications with polyesters, urethanes, PVC plastisol, and other systems where low viscosity and low shear processing conditions are used.

Luna-vin SP is a medium molecular weight suspension resin, which provides clarity and toughness to rigid films, or solution coatings. Luna-vin SP also provides durability and chemical and stain resistance. Luna-vin SP can be used in adhesives, heat-sealable packaging, marine and protective coatings, magnetic cards and printing inks.

EPOTEC RD 104 is a clear liquid mono-functional glycidyl ether based on phenol, designed to reduce the viscosity of conventional epoxy resins. It is fully compatible with epoxy resins and can be cured with common agents. Ideal for applications like floorings, adhesives, tooling, potting, and casting, it offers excellent blending and processing benefits.