Paints & Coatings

CMP™ COLOURED ANTI-SKID AGGREGATES is produced with European technology and production process. It has special advantage in life time, colour and safety for road construction and maintenance. The aggregates is made by calcinating hard minerals with pigment at high temperature and then crushed into designed sizes and coated with a hard layer of colour film. Applied with high strength epoxy resin system, it can make the abrasion value of road surface to 70 up. It improves road safety by reducing braking distance by 30%-40%. Its vivid colour is good traffic separation and management as well as beautiful decoration. Because of its double colouring system, the colour of aggregates can last long – after the coating film is worn out, the inside aggregates is still colourful. CMP™ COLOURED ANTI-SKID AGGREGATES is convenient and easy in application.

ZA201 Carbon Fiber Fabric is a flexible, woven, unidirectional carbon fiber fabric made from PAN-based 12K carbon fiber filaments. It is used as an externally applied reinforcement for strengthening concrete, timber, and masonry structures, meeting PRC National Standards: GB50367-2013, GB50728-2011, and GB/T21490-2008. The standard areal weight is 200g/m2 and 300g/m2, with widths ranging from 10cm to 100cm, and customized production is available. It is designed for experienced professionals for structural strengthening to increase flexural and shear loading capacity, improve seismic performance, replace missing steel reinforcement, and enhance service life and durability. The fabric is chemical and corrosion-resistant, compatible with different materials and adhesives, stable due to heat-set weft fibers, and multifunctional for various applications. It is flexible to accommodate different surface planes and geometries, available in different widths, lightweight, cost-effective compared to traditional strengthening techniques, and has a low aesthetic impact.

ZA301 Carbon Fiber Fabric is a flexible, woven, unidirectional carbon fiber fabric made from PAN-based 12K carbon fiber filaments. It is used as an externally applied reinforcement for strengthening concrete, timber, and masonry structures, meeting PRC National Standards: GB50367-2013, GB50728-2011, and GB/T21490-2008. The standard areal weight is 200g/m2 and 300g/m2, with widths ranging from 10cm to 100cm, and customized production is available. It is designed for experienced professionals for structural strengthening to increase flexural and shear loading capacity, improve seismic performance, replace missing steel reinforcement, and enhance service life and durability. The fabric is chemical and corrosion-resistant, compatible with different materials and adhesives, stable due to heat-set weft fibers, and multifunctional for various applications. It is flexible to accommodate different surface planes and geometries, available in different widths, lightweight, cost-effective compared to traditional strengthening techniques, and has a low aesthetic impact.

Epotec YD 134 is an unmodified semi-solid epoxy resin based on Bisphenol-A. At normal room temperature of 25°C this resin has high viscosity & has no or very little flowability. This resin has molecular weight higher than standard liquid epoxy resin epotec YD 128. Due to its viscous, semi-solid nature this resin is used, normally with solvents or applied at elevated temperature to induce the flow, mainly in adhesives & protective coatings. It can also be used to modify other epoxy resins to impart or improve the toughness, flexibility, adhesion etc.