DURASOL 832 is an acrylic modified copolymer solution developed and designed in a low viscosity, low odor version for use particularly in enclosed areas where solvent odor build-up would normally be a problem. It provides a hard, high gloss, flexible film with excellent resistance to weathering, water and alkalis. Applications include both interior and exterior clear coatings and pigmented finishes to masonry, providing excellent adhesion especially for re-priming masonry where a low PVC emulsion top-coat is to be applied.

PLEXTOL D 2428 is a self crosslinking acrylic emulsion which exhibits excellent wet scrub resistance and is designed specifically to be formulated as a surface sealer for interior and exterior substrates. PLEXTOL D 2428 self crosslinking acrylic emulsion will not blush or water spot after 3 - 4 days curing at room temperature.

DURASOL 500 thermoplastic acrylic solution is a modification of our widely used Durasol 310 that has been internally modified to give a more flexible film. It produces hard, very flexible, but highly durable coatings with excellent gloss retention. It is ideally suited for external use in clear or pigmented coatings on a variety of substrates. Applications include concrete, masonry and steelwork coating.

DURASOL 362U/24RX thermoplastic acrylic resin solution is a ready-to-use formulation that produces a hard, yet flexible clear film. It is non-yellowing, has excellent resistance to water, alkalis and contains a UV absorber to improve protection against UV light. It is ideally suited for clear and pigmented coatings on a wide range of substrates, such as concrete, masonry, pavers and slate sealers.