ORGASOL® 2002 ES6 NAT 3 is a spheroïdal powder of polyamide 12, with 60 µm as average diameter and a narrow particle size distribution. An extremely high level of quality is achieved thanks to our rigorous control of particle size distribution, providing excellent consistency in performance. ORGASOL® 2002 ES6 NAT 3 is used as a multifunctional additive in coatings. It improves the scratch and the abrasion resistance while providing a regular textured finish thanks to the spheroïdal shape of the particles. Playing on coatings texture, ORGASOL® 2002 ES6 NAT 3 can lead to anti-slippery properties associated to a better clean ability. The high chemical resistance of polyamide 12 and the particle size distribution are among the key parameters that make ORGASOL® 2002 ES6 NAT 3 compatible with most resins and common formulating additives used in coating industry. It can be added to interior or exterior paints and easily dispersed in solvent or water based or 100% solid UV curable system.

CRAYVALLAC® Antisettle® P is specifically formulated to prevent the settling of pigments and fillers, ensuring a consistent and uniform distribution throughout your formulation. CRAYVALLAC® Antisettle® P is a reliable solution that guarantees excellent stability and long-lasting results.

CRAYVALLAC® SL is a high performance micronised amide wax rheology modifier designed for the high temperature manufacture of moisture curing methoxysilanes systems, where processing temperatures typically lie within the range 90 – 115°C. CRAYVALLAC® SL particles are converted to an interacting network of crystalline fibres. It is this network that gives rise to the shear thinning rheology. This shear thinning characteristic provides for a low viscosity at the shear rates associated with application by extrusion, and a very high viscosity under the low shear rates experienced after application. The net result is ease of application followed by excellent sag and slump resistance.

CRAYVALLAC® PC is a micronised hydrogenated castor oil derivative surface enhancing additive for powder coatings based on PRIMID, hybrid and TGIC technologies. CRAYVALLAC® PC is easily incorporated using conventional pre-mixing techniques prior to extrusion. The use of CRAYVALLAC® PC leads to a substantial improvement in the appearance of the final cured powder coating. This improvement is due to CRAYVALLAC® PC enhancing the flow, levelling and degassing processes during cure. This is the result of CRAYVALLAC® PC greatly reducing the melt viscosity during this critical levelling stage in the cure cycle. This viscosity reduction also enhances the performance of other additives such as acrylic levelling agents and the degassing agent benzoin. CRAYVALLAC® PC works well in both clear and pigmented powder coating systems based on PRIMID, Hybrid and TGIC technologies.