Recyclamine® R802 is an amine curing agent which enables recyclable thermosetting epoxy. It possesses low viscosity, cures at ambient temperature and exhibits moderate reactivity with di-epoxide resins. Unlike conventional thermoplastics, cross-linked thermosetting matrix from Recyclamine® R802 undergoes cleavage by low energy solvolysis at specific conditions, resulting in recovering of the epoxy matrix as thermoplastic resin. In fiber reinforced composites, Recyclamine® R802 enables recycling & recovery of reinforcement and epoxy matrix as thermoplastic resin. The recovered materials can be re-used to close the loop.

Epotec TH 7540 is a medium-low viscosity reactive polyamide used as a curing agent for liquid or solution grade epoxy resins such as Epotec YD 515 or epotec YD 011X-75 to produce room temperature curable thermoset coatings. Epotec TH 7540 is specially used in solvent based anti-corrosion coatings and shows compatibility with wide range of solvents normally used in epoxy based coatings. Coatings based on Epotec TH 7540 are relatively more chemical resistant and normally lower in viscosity than Epotec TH 7515 based coatings. The coatings based on Epotec TH 7540 shows good toughness and adhesion properties. Because of these properties it finds use in various applications.

ChemCure® 319 cycloaliphatic amine curing agent for epoxy coatings with very good aesthetics, fast curing, and superior yellowing resistance. ChemCure® 319 curing agent provides films that are high gloss and have good chemical, scratch, and blush resistance when cured at ambient temperature. When cured with ChemRes™ 635 epoxy resin specialty epoxy resin blend, the resulting film has excellent appearance and performance.

ChemMod® 48 reactive diluent is a trifunctional, aliphatic, Trimethylol propane Tri glycidyl ether. In standard liquid epoxy resin, ChemMod® 48 product maintains pot life and hardness development at higher blend percentages required to cut viscosity.